MSF Basic Rider Course Exam Questions With Verified Answers Latest 2024/2025 | Graded A+.

MSF Basic Rider Course Exam Questions With Verified Answers Latest 2024/2025 | Graded A+. Serious because there is risk involved; fun because riding a motorcycle is fun. - Correct Answer- Why is motorcycling considered serious fun? Fitness, strength, coordination - Correct Answer- Learning to ride and ride well requires what physical traits? Guide students, answer questions, observe progress - Correct Answer- What do RiderCoaches do? 1. Complete all course assignments 2. Attend all sessions 3. Pass a knowledge test 4. Pass an on-cycle test - Correct Answer- What are the four requirements for successful course completion? If a rider has a lot of difficulty or becomes a danger to themselves or others. - Correct Answer- When does a RiderCoach not permit further riding in the course? street, dual-purpose, off-highway - Correct Answer- What are the three basic motorcycle types? street - likely a standard or a cruiser (probably start on a standard and move to a cruiser) - Correct Answer- Pick the motorcycle type you will likely ride and explain why. handlebars, throttle, clutch lever, gearshift lever, front brake lever, rear brake pedal - Correct Answer- List the six primary controls. Rotate to control engine speed; to increase engine speed, twist it toward you (roll on); to decrease engine speed, twist it away from you (roll off) - Correct Answer- How do you operate the motorcycle's throttle? Connects power from the engine to rear wheel - Correct Answer- What does the clutch level do? Lift up firmly and release to go to a higher gear; press down firmly and release to go to a lower gear - Correct Answer- How is the gearshift level operated? How many gears are available below and above neutral - Correct Answer- What is a shift pattern? MSF Basic Rider Course Exam Questions With Verified Answers – Latest 2024/2025 | Graded A+ Front brake level is squeezed in to operate; the amount of squeeze must be adjusted for effective braking. Rear brake pedal is pressed down to operate it. - Correct AnswerHow are the two brake controls operated? On, Reserve, and Prime or Off - Correct Answer- What are possible positions on the fuel valve? On, Off, and Lock, and possibly Park - Correct Answer- What are possible positions on the ignition switch? Provide an enriched fuel mixture to help start the engine; raises idle to permit the engine to warm quickly. - Correct Answer- What is the choke control used for? You can shut off the engine without removing your hand from the handgrip. - Correct Answer- Why does a motorcycle have an engine cut-off switch? Speedometer, odometer, tachometer, indicator lights - Correct Answer- What are some common indicators that display information? They provide a wider view but make objects look farther away. They also reduce the size of blind spot areas but do not eliminate them. - Correct Answer- What is important to know about a convex mirror? Center stand keeps the motorcycle more upright. - Correct Answer- What is the difference between a side stand and center stand? fuel, ignition, neutral, engine cut-off switch, and choke/clutch (FINE-C) - Correct Answer- List the five steps of the engine pre-start routine. move engine cut-off switch to Off, turn ignition switch off, and turn fuel supply valve Off if it has that position (thumb, key, valve) - Correct Answer- What are the three steps to follow when shutting off the engine? A small area in the travel of the clutch lever that controls the connection between the engine and the rear wheel. - Correct Answer- Which is the friction zone? Fully squeezing in the clutch level removes power from the rear wheel. - Correct Answer- What does squeezing the clutch lever do? Squeeze the clutch lever in fully and use the brakes are needed. - Correct AnswerWhat must you do if you start to lose control of the motorcycle? Flat - Correct Answer- What is the position of the right wrist for good riding posture? Back straight, head & eyes up, feet on footrests near the controls, knees & elbows in, arms relaxed and bent, fingers around the throttle, cover the clutch lever. - Correct Answer- What are the other elements of proper riding posture? Countersteer - press left, lean left; press right, lean right - Correct Answer- How do you initiate motorcycle lean at speeds higher than walking speed? 1 - slow, 2-look, 3-press, and 4-roll - Correct Answer- What are the four action steps for making a basic turn? 1 - Search means to look for key information while approaching and going through a curve 2 - Setup is to adjust speed and lane position as necessary before entering 3 - Smooth means to operate the controls so there are no jerky moverments - Correct Answer- What is three-step strategy for curves and what does each step mean? Slow, tight turns like a U-turn in a parking lot. - Correct Answer- In what type of turn does counterweighting help?