3CX BASIC CERTIFICATION EXAM 2024 NEWEST ACTUAL EXAM VERIFIED 100 QUESTIONS AND CCORRECT ANSWERS ALREADY GRADED A+. 3CX requires a ... in order to be setup - ANSWER- FQDN NAT translates ... IPv4 IP addresses to ... private IP adresses - ANSWER- Public, pr

3CX BASIC CERTIFICATION EXAM 2024
NEWEST ACTUAL EXAM VERIFIED 100
QUESTIONS AND CCORRECT ANSWERS
ALREADY GRADED A+.

3CX requires a ... in order to be setup - ANSWER- FQDN



NAT translates ... IPv4 IP addresses to ... private IP adresses - ANSWER- Public,

private



NAT can also be used to limited who can access the server using? - ANSWER- ACL



IPv4 and ... are supported by 3CX - ANSWER- IPv6



IPv6 ... (NAT) is not supported by 3CX - ANSWER- Masquerading



If IPv6 is used ... rules are needed - ANSWER- Firewall



3CX PBX requires ... NAT - ANSWER- Full Cone



SIP/SDP defines the port not the ... - ANSWER- Transport header



It is recommended to ... SIP ALG - ANSWER- Disable

, The default SIP ports are ... UDP/TCP - ANSWER- 5060



What NAT port range does 3CX use for audio? - ANSWER- 9000 - 10999 UDP



If you want to use the 3CX app or use an SBC you will need to open the PBX tunnel

port. The default TCP/UDP port is? - ANSWER- 5090



If you want to use the 3CX app or use an SBC you will need to open the HTTPS port.

The default TCP port is? - ANSWER- 5001



To enable the use of 3CX webmeeting you will need to allow outbound traffic to ... -

ANSWER- webmeeting.3cx.net:443



3CX Webmeeting requires that the HTTPS Port is open for TCP traffic, which port is

this? - ANSWER- 5001



Port ... TCP is used to provision IP phones - ANSWER- 5001



To perform remote configuration of the PBX you will need to allow inbound traffic on

port ... TCP for the duration of the setup. - ANSWER- 5015



On the dashbard of the 3CX Management console we can check to see if the ... has

been configured correctly. - ANSWER- Firewall