BICSI Practice Test-RETAKE Exam Questions With Verified Answers

BICSI Practice Test-RETAKE Exam Questions With Verified Answers The 2 main considerations concerning the existing cabling are? - answerGrandfathered system Abandoned cable 11-25 The type of cutover where cross-connects are relocated one pair after another until completed is called a - answerrolling cut 11-28 Which practice involves moving the customer to a temporary office space until their section of the retrofit is completed and then moving them back to their recabled office space? - answerSwing space phasing Which of these testers would you clamp around a strand of fiber to check for the presence of light? - answerFiber strand identifier 11-11 A ______ provides a quick graphical representation of how the circuit is layed out? - answerCLR 11-27 A ______ uses several pluggable modules to locate and Identify cables. - answerOffice locator kit A _________ injects light (at a proper wavelength) and measures the results t the other end. - answerLight source and power meter A ________ detects the presence of light within a fiber strand - answerFiber strand identifier A _______ uses a laser to identify fiber strands and find breaks in the fiber at the near end. - answerVisual fault locator A________ will leave the customer momentarily without communications - answerHot-cut 11-28 During a _______, cross-connects are relocated one pair after another until completed. - answerRolling cut *_________ is a property of an electromagnetic field built around a conductor that opposes any changes in current flow in a circuit. - answerInductance ____________ is a property of conductors that allows storage of electrical charges when potential differences (voltages) exist between the conductors. - answerCapacitance *In AC circuits, the total opposition to current flow is called _________, which is measured in ohms. - answerImpedance The nominal characteristic impedance of balanced twisted pair cable is _______ ohms at 100 MHz - answer100 Pair 626 would be in the __________ Super Binder - answerRed Series ______ is the preferred choice for longer runs - answer11 The _________ connector/s have center pins (choose all that apply) - answerN BNC The way in which others perceive an employee can be divided into 3 distinct areas: body language, Tone of voice and choice of words. Which of the 3 makes the biggest impression? - answerBody language - 55% The range of human hearing is from _________ - answer20 Hz- 20,000 Hz An increase of _______ will result in a doubling or halving of the power. - answer3 dB Increases or decreases of ________ for voltage will cause an increase or decrease of 10 times the original value. - answer6 dB The code stands for "flush-or surface-mounted jack" - answerC A "push to talk" intercom system would be an example of a ______ transmission method. - answerhalf-duplex 1-1 __________ quantifies the bandwidth of a cabling system in a frequency range of interest. - answerMegahertz _________ refers to the amount of information that can be transported over the media. - answerMegabit A gauge change of ____ numbers approximately doubles or halves the conductors resistance - answer3 A gauge change of _______numbers approximately doubles or halves the conductors diameter - answer6 ______ is not recommended for new installations (what type of fiber) - answerOM2 What type of fibers typically support wavelengths of 850 nm and 1300nm - answerOM1