BNSF Train Dispatcher Final Exam Questions And Answers (Verified And Updated)

BNSF Train Dispatcher Final Exam Questions And Answers (Verified And Updated) A block or interlocking signal without a number plate, or designated by an A marker. - answerAbsolute Signal A siding within CTC or interlocking limits where a signal indication authorizes the siding's use. - answerControlled Siding An absolute signal controlled by a control operator. - answerControlled Signal The tracks between outer opposing absolute signals of an interlocking - answerInterlocking Limits A movement opposite the authorized direction. - answerReverse Movement A fixed signal at the entrance of a block that governs trains entering and using that block. - answerBlock Signal A block system that uses block signal indications to authorize train movements. - answerCentralized Traffic Control [CTC] The location of absolute signals controlled by a control operator. - answerControl Point A track connection between two adjacent tracks, consisting of two switches, which is intended to be used primarily for the purpose of crossing over from one track to the other. - answerCrossover The movement of trains in one direction on a main track, as specified by the rules. - answerCurrent of Traffic A fixed signal outside a block system that governs the approach to a block signal, interlocking signal, or switch point indicator. - answerDistant Signal An electrically controlled lock that restricts the use of a hand-operated switch or derail. - answerElectric Switch Lock A main track where trains are operated in both directions. - answerSingle Track A place designated by name in the timetable station column. - answerStation A notice of conditions affecting train movement. It may also authorize movement against the current of traffic where Rule 9.14 (Movement with the Current of Traffic) is in effect. - answerTrack Bulletin A method to authorize train movements or protect men or machines on a main track within specified limits in a territory designated by the timetable. - answerTrack Warrant Control [TWC] Main Track [Verbatim] - answerA track extending through yards and between stations that must not be occupied without authority or protection. Restricted Speed [Verbatim] - answerWhen required to move at restricted speed, movement must be made at a speed that allows stopping within half the range of vision short of: • Train. • Engine. • Railroad car. • Men or equipment fouling the track. • Stop signal. or • Derail or switch lined improperly. When a train or engine is required to move at restricted speed, the crew must keep a lookout for broken rail and not exceed 20 MPH. Comply with these requirements until the leading wheels reach a point where movement at restricted speed is no longer required. (6.27) Train [Verbatim] - answerOne or more engines coupled, with or without cars, displaying a marker, and authorized to operate on a main track. How may rules be issued, canceled or modified? - answerTrack bulletin, general order or special instruction (1.3.1) How much can watches and clocks be off? - answer30 Seconds (1.48) Employees must not use the radio to give information to a train or engine crew about the name, position, aspect, or indication displayed by a fixed signal, unless - answerThe information is given between members of the same crew or the information is needed to warn of an emergency. (2.12) Before a field employee reports clear or releases a portion of authority limits, and the Train Dispatcher/Control Operator accepts the information, what must occur? - answerThe employee will provide their name or other identification and the authority number to the Train Dispatcher/Control Operator. At least ______ before a new timetable goes into effect, notification will be made by ________. A _________ _________ will also be issued at least __________ before the new timetable goes into effect and continue for ________ after the effective date. - answer24 Hours / General Order / Track Bulletin / 24 Hours / 6 Days (4.1.1) What does a green flag indicate? - answerEnd of temporary speed restriction (5.4.5) Explain how to place overlapping green flags. - answerIf a series of locations requires reduced speeds, the green flags could overlap yellow flags. When this is the case, employees must: - Place a yellow flag before each speed restriction. - Place a green flag at the end of the last speed restriction. (5.4.5)