JLTV Test B Questions and Answers Already Passed

JLTV Test B Questions and Answers Already Passed Which is the only JLTV variant with a two-seat configuration? A. GP B. HGC C. CCWC D. UTL D. UTL Which of the following lights indicates that you will NOT be able to adjust the ride height? A. LVD B. SPNSN ERROR C. SPNS NOT LEVEL D. CTIS FAULT B. SPNSN ERROR What are the benefits of the vehicle design using half shafts instead of straight axles on the JLTV? A. To account for angles produced by suspension movement. B. To ensure that both wheels respond as one while driving off-road C. Because straight axles cannot be driven off road D. To allow for the transmission of energy from the differential to the transaxle A. To account for angles produced by suspension movement. Using the pictures below, label the parts Forting Stacks Pre-Cleaner List the four Central Tire Inflation System (CTS) terrain settings HWY, CC, MSS, EMER Explain why the MUX panel switches need to be pressed and held for at least one second Prevents inadvertent bumps or taps from changing the lighting settings What does the DSDU monitor that signals it to turn on/off automatically? A. Engine sensors (when engine gets power) B. VEH BATT switch (when batteries are engaged) C. When vehicle starts engine turned over D. Ignition switch turned to ON D. Ignition switch turned to ON List three benefits the DSDU provides to the driver Possible answers include: It provides maintenance levels (like fluids, pressure and temperature) without having to look under the hood. It shows real time pitch and roll. It shows the status of the suspension level and allows the driver to adjust the suspension. Allows the CTIS options It displays real time data about the circuit breaker. It displays the status of critical vehicle systems. Match the JLTV controls with the callouts on the dashboard shown below. DSDU C HVAC controls F Parking brake A Systems Control MUX panel B Trailer Air Supply D Transmission Shift Selector E Which of the following is NOT part of JLTV Basic Issue Items (BIl)? A. Suspension lockout braces B. Tow bar C. Wheel chocks D. Hydraulic jack adaptor B. Tow bar When inventorying your BII, which of the following codes is NOT used to annotate the form? A. S-ServIceable B. P-Present C. M-Missing D. U-Unserviceable B. P-Present What is the combined rating of using a snatch block with the winch? A. 18,500 lbs. B. 22,500 lbs. C. 37.000 Ibs. D. 50.000 Ibs. C. 37,000 Ibs. List three post-check items vou inspect after driving