Urinalysis & Body Fluids Questions & Answers 100% Verified!!

Urinalysis & Body Fluids Questions & AnsweMeasure the total volume - ANSWERSAfter recieving a 24-hour urine for quantitive total protein analysis, the technician must first: Exposed to light - ANSWERSFalse results in urobilinogen testing may occur if the urine specimen is: Be rejected due to the time delay - ANSWERSA clean-catch urine is submitted to the laboratory for routine urinalysis and culture. The routine urinalysis is done first, and 3 hours later, the specimen is sent to the microbiology department for the culture. The specimen should: Bilirubin - ANSWERSWhich of the following urine results is the most apt to be changed by prolonged exposure to light? Bacterial contamination will cause alkalinization of the urine - ANSWERSUrine samples should be examined within 1 hour of voiding because: @ 4-7 degres celcius - ANSWERSA urine specimen comes to the laboratory 7 hours after it is obtained. It is acceptable for culture only if the specimen has been stored: PH - ANSWERSWhich of the following would be affected by allowing a urine specimen to remain @ room temperature for 3 hours before analysis? Centrifuging an unmixed specimen - ANSWERSFalure to observe RBC casts in a urine specimen can be caused by: mL/min - ANSWERSThe creatinine clearance is reported in Nephropahty - ANSWERSMicroalbumin can be measured by a random urine collection. An increased microalbumin is predictive of: Pale urine with a high specific gravity - ANSWERSA patient with uncontroled diabetes mellitus will most likley have: rs 100% Verified!!