IICRC WRT & ASD Questions & Answers(Rated A )
Wearing PPE on a sewage damaged project shall be done because it - ANSWERIs mandotary due to natural law or regulatory requirement
technicians Should clean and dry affected materials because it is - ANSWERcomponent
of the accepted standard of care, but not mandatory.
If something is recommended, that means it is - ANSWERAdvised or suggested but not a component of the standard of care
May means - ANSWERSignifies permission but not a component of the standard of care
The word CAN means - ANSWERThe ability or possibility but not a component of the standard of care
We need to leave buildings that have been damaged by water both - ANSWERClean and dry
The first concern of restorers on a project is - ANSWERThe health and safety of workers and occupants
why is rapid response so important - ANSWERLimits the potential for damages and can
reduce drying time
Attempting to identify safety issues should begin as soon as - ANSWERThe inspection process
you find sagging ceilings that are heavy and saturated with water what should you do? -
ANSWERDrain the water, remove the saturated drywall and dispose of it
When water is evaporating and leaving a surface the surface - ANSWERCools
Air movers primarily aid in drying by increasing - ANSWERThe rate of evaporation
PPE is required by regulations so it shall be used according to the s500 - ANSWERTrue
Thermal imaging cameras help find water that is evaporating because the surface is - ANSWERCooler Other than extraction what has the most effect on drying time - ANSWERThe rate of evaporation
what air temperature range is ideal for LGR dehumidifiers? - ANSWER70-90F
This course is designed as a comprehensive safety course - ANSWERFalse
For safety, drying equipment shall be equipped with a - ANSWERGrounded plug
name 3 components of a respiratory protection program - ANSWERMedical evaluation, fit testing, and proper training
If you are cleaning up a sewer damaged project, at a minimum what PPE should be worn? - ANSWERFull face respiratory, water resistant suit and waterproof gloves and boots
This course is designed to teach you how to identify and handle hazardous material - ANSWERFalse
Name two hazardous materials that are more likely to be found in older building - ANSWERLead and asbestos
What organization has safety and health courses specifically tailored to the restoration industry - ANSWERIICRC
According to the Hierarchy of controls what is the least effective control measure? - ANSWERPPE
What is an IEP - ANSWERIndoor Environmental Professional
What begins at 20% wood moister content or above? - ANSWERWood Root Fungi
What can begin at 16% wood moister content? - ANSWERNon-destructive mold growth
Name 2 reasons why we should begin remediation as soon as possible. - ANSWERReduce potential for damage and reduce potential for microbial growth
What antimicrobial provides the lowest level of microorganism reduction - ANSWERSanitizer
When you find mold on a water damage project, what are 3 things you should do? - ANSWERPut on appropriate PPE, initial barriers or containment and install ventilation
If you find mold growth, what equipment would you not install? - ANSWERAir movers
Wearing PPE on a sewage damaged project shall be done because it - ANSWERIs mandotary due to natural law or regulatory requirement
technicians Should clean and dry affected materials because it is - ANSWERcomponent
of the accepted standard of care, but not mandatory.
If something is recommended, that means it is - ANSWERAdvised or suggested but not a component of the standard of care
May means - ANSWERSignifies permission but not a component of the standard of care
The word CAN means - ANSWERThe ability or possibility but not a component of the standard of care
We need to leave buildings that have been damaged by water both - ANSWERClean and dry
The first concern of restorers on a project is - ANSWERThe health and safety of workers and occupants
why is rapid response so important - ANSWERLimits the potential for damages and can
reduce drying time
Attempting to identify safety issues should begin as soon as - ANSWERThe inspection process
you find sagging ceilings that are heavy and saturated with water what should you do? -
ANSWERDrain the water, remove the saturated drywall and dispose of it
When water is evaporating and leaving a surface the surface - ANSWERCools
Air movers primarily aid in drying by increasing - ANSWERThe rate of evaporation
PPE is required by regulations so it shall be used according to the s500 - ANSWERTrue
Thermal imaging cameras help find water that is evaporating because the surface is - ANSWERCooler Other than extraction what has the most effect on drying time - ANSWERThe rate of evaporation
what air temperature range is ideal for LGR dehumidifiers? - ANSWER70-90F
This course is designed as a comprehensive safety course - ANSWERFalse
For safety, drying equipment shall be equipped with a - ANSWERGrounded plug
name 3 components of a respiratory protection program - ANSWERMedical evaluation, fit testing, and proper training
If you are cleaning up a sewer damaged project, at a minimum what PPE should be worn? - ANSWERFull face respiratory, water resistant suit and waterproof gloves and boots
This course is designed to teach you how to identify and handle hazardous material - ANSWERFalse
Name two hazardous materials that are more likely to be found in older building - ANSWERLead and asbestos
What organization has safety and health courses specifically tailored to the restoration industry - ANSWERIICRC
According to the Hierarchy of controls what is the least effective control measure? - ANSWERPPE
What is an IEP - ANSWERIndoor Environmental Professional
What begins at 20% wood moister content or above? - ANSWERWood Root Fungi
What can begin at 16% wood moister content? - ANSWERNon-destructive mold growth
Name 2 reasons why we should begin remediation as soon as possible. - ANSWERReduce potential for damage and reduce potential for microbial growth
What antimicrobial provides the lowest level of microorganism reduction - ANSWERSanitizer
When you find mold on a water damage project, what are 3 things you should do? - ANSWERPut on appropriate PPE, initial barriers or containment and install ventilation
If you find mold growth, what equipment would you not install? - ANSWERAir movers
