Module 6 (Construction Class) Exam Questions And Answers

Module 6 (Construction Class) Exam Questions And Answers Identification tags for slings must include the: - ANS Manufacturer's name or trademark. The type of wire rope core that is susceptible to heat damage at relatively low temperatures is the: - ANS Fiber core. Synthetic slings must be inspected: - ANS Before every use. An alloy steel chain sling must be removed from service if there is evidence that: - ANS Replacement links have been used to repair the chain. A piece of rigging hardware used to couple the end of a wire rope to eye fittings, hooks, or other connections is a(n): - ANS Hitch. A lifting clamp is most likely to be used to move loads such as: - ANS Steel plates. Chain hoists are able to lift heavy loads by utilizing a: - ANS Gear system. Before attempting to lift a load with a chain hoist, make sure that the: - ANS Load is properly balanced. A hitch configuration that allows slings to be connected to the same load without using a spreader beam is a: - ANS Bridle hitch. To make the Emergency Stop signal that is used by riggers, extend both arms: - ANS Horizontally with palms down and quickly move both arms back and forth. Block and tackle: - ANS A simple rope-and-pulley system used to lift loads. Bridle: - ANS A configuration using two or more slings to connect a load to a single hoist hook.