NCCCO TEST 2 Questions with 100% Verified Correct Answers 2024/2025

NCCCO TEST 2 Questions with 100% Verified Correct Answers 2024/2025 When making a multiple crane lift, it is important for the operator to understand that: - Correct Answers The weight may increase if the other crane lands the load If a crane is not set-up level and the operator swings a load from the high side to the low side, the load radius will: - Correct Answers Increase Most crane manufacturers reduce load capacity for duty-cycle operations because: - Correct Answers Side loading forces may occur On who's recommendations should a preventative maintenance program be set-up? - Correct Answers Crane manufacturer What is the standard rope used on most cranes? - Correct Answers Right regular lay The proper way to calibrate a boom angle indicator is: - Correct Answers Using a level, raise the boom to horizontal and set the indicator at 0 degree. The red area of an instrument gauge means: - Correct Answers A dangerous condition exists The best way to keep people from being injured from the counterweight of the crane is to: - Correct Answers Fence or barricade the swing area of the crane Only approved attachments or extra counterweights made by the manufacturer should be placed on the rear of the crane because: - Correct Answers They could cause a backward stability problem What is the first thing an operator should do before going under a low pipe rack? - Correct Answers Post a signalperson to check clearance When working on outriggers, the only time they should be less than fully extended is when: - Correct Answers There is a load chart for this operation When lifting loads from the water, the operator should be aware that: - Correct Answers The load will increase when you pick the load from the water