850, 815, 845, 840, NEIEP 800 final fully solved 2024

850, 815, 845, 840, NEIEP 800 final Foundation, base enclosure, buffer springs - correct answer Rack and Pinion pit structures consist of which of these components? A minimum of two back up rollers on the machinery plate is required - correct answer Which of the following is true regarding rack and pinion hoists? Mounted to the frame below the lowest pinion - correct answer Safety hooks are best described by which of the following? They must be made of metal - correct answer Regarding code requirements for backup rollers which of the following is correct? Rack sections are bolted to the tower and aligned with roll pins at each end - correct answer Which of the following best describes Tower sections for R&P hoists? If free wheels until the hoist exceeds tripping speed in the down direction - correct answer What best describes the pinion of the governor safety device? Back up rollers - correct answer What is the component that maintains proper rack-to-pinion engagement? It is spring set and electrically released - correct answer Which of the following best describes the rack and pinion drive motor brake? It is typically reinforced concrete one foot thick - correct answer What is true regarding the foundation for temporary R&P hoist? ANSI A10.4 - correct answer What code do most issues regarding the installation of temporary hoists fall under?