Sophos UTM 9.3 - Module 302 - System Configuration Questions and Answers 100% Solved correctly

Auditor account permissions - Answer-Read Only webadmin account, limited to logfiles and report Read only account permissions - Answer-Unlimited access to the entire UTM, but read only Keyboard Shortcuts defaults - Answer-Users and Groups = CTRL + V Ednpoint Security = CTRL + W Interfaces = CTRL + C Networks = CTRL + Z Set focus on searchbox = CTRL + Y Services = CTRL + X Each UTM account can set these shortcuts individually License - user limitations - Answer-Hardware versions have unlimited users Software versions track number of users by IP and will notify when exceeded Default Up2Date interval - Answer-Every 15 minutes - Downloads updates but does not automatically install Options for importing backup files - Answer-- Directly via WebAdmin - During initial setup - From USB (Does NOT support encrypted backups) Automatic backup default - Answer-Taken weekly Keeps 10 backupsSent to admin email Can optionally be encrypted (Not by default) Definitions can be created for - Answer-Networks Services Times Definitions can be - Answer-Edited Cloned Deleted Network Definition types - Answer-Host - Single IPV4 address with 32 bit mask DNS Host- Host name which resolves to an IP DNS Group- Supports hostnames which resolve to multiple IP Range - A range of IP addresses, can only be used in NAT and Firewall Network- A network defined by an IPV4 and netmask Multicast - A network in multicast range Network group - A group of network definitions Availability group - A prioritized list of host and DNS host definitions, the first found is used For each interface... - Answer-Three network definitions are automatically created (Internal) replaced with name of interface - Internal (Address) The IP Address of the interface - Internal (Broadcast) The broadcast address of the interface - Internal (Network) The network ID Service definitions - Answer-Used to link a service to a port for firewall rulesTime period definitions - Answer-Used for firewall rules, web filtering, and wireless Two types: Recurring (Daily or weekly) and one off Interfaces - Answer-Requires an IP Must be in a unique range May optionally have a default gateway (Usually WAN) Multiple VLANs can be created on a single interface Supports 3G USB stick as emergency interface Routing protocols - Answer-Static Routing Required only for networks not directly connected to the UTM The UTM Automatically makes a route to all interfaces on the UTM Interface Route - Answer-Sends packets straight to the interfaces relevant LAN, uses PPP Gateway route - Answer-Sends packets to the next hop router Blackhole route - Answer-Drops packets with confirmation, used with dynamic routing to prevent a loop Policy routing - Answer-Allows rules based onSource interface Source / destination networks Service Two types Interface or gateway Can be used for load balancing, for example, route all SMTP traffic through different ISP Link Aggregation - Answer-Allows you to combine ethernet links for higher throughput Up to 4 interfaces can be used