Introduction to Basic Rigging fully solved graded A+

Introduction to Basic RiggingBlock and tackle - correct answer A simple rope-and-pulley system used to lift loads. Bridle - correct answer A configuration using two or more slings to connect a load to a single hoist hook. Bull ring - correct answer A single ring used to attach multiple slings to a hoist hook. Competent person - correct answer An individual who is capable of identifying existing and predictable hazards or working conditions that are hazardous, unsanitary, or dangerous to employees; an individual who is authorized to take prompt corrective measures to eliminate these issues. Core - correct answer Center support member of a wire rope around which the strands are laid. Hitch - correct answer The rigging configuration by which a sling connect the load to the hoist hook. The three basic types of _____es are vertical, choker, and basket. Hoist - correct answer A device that applies a mechanical force for lifting or lowering a load. Lifting clamp - correct answer A device used to move loads such as steel plates or concrete panels without the use of slings. Load - correct answer The total amount of what is being lifted, including all slings, hitches, and hardware. Load control - correct answer The safe and efficient practice of load manipulation, using proper communication and handling techniques. Load stress - correct answer The strain or tension applied on the rigging by the weight of the suspended load.