PADI RDP Table and eRDPML Exam Questions with Guaranteed Accurate Answers

When using the Recreational Dive Planner (table or eRDPML), you should ascend (go up) no faster than... per minute or the maximum rate allowed by your computer, which is slower. - correct answer 18 meters / 60 feet The RDP Table and eRDPML allow you to see the relationship between - correct answer Depth and no stop time. You dive to a depth of 11 meters / 39 feet and stay for 46 minutes. What would my pressure group (PG) be at the end of the dive? - correct answer K You have made a dive then stayed on the surface for a while. After this surface interval your pressure group is K. What is the maximum amount of bottom time available when doing a repetitive dive to 17 meters / 56 feet? - correct answer 26 minutes After a surface interval your pressure group is D. You want to do a repetitive dive to 12 meters / 38 feet for 32 minutes. What will be your new pressure group (PG) when I reach the surface? - correct answer N I dive to 59 feet for 22 minutes. After a 30 minute surface interval, I plan to dive to 50 feet. What is the maximum allowable time for the second dive? - correct answer 61 Minutes - Using the Dive Planning mode on the eRDPML, enter No for Multilevel Dive, enter Yes for First Dive, enter 59, hit enter after seeing NDL, enter 22 minutes for ABT - pressure group is H. Enter the surface interval - 30 - the new pressure group is D. Enter next depth - 50ft - the ANDL is 61 minutes.Using RDP Table 1 find the next greatest depth on the top row - 60ft - and follow the column down to the next greatest time - 23 - go across to find pressure group H. In RDP Table 2, follow H to find 30 minutes (between 29-37 minutes) and follow that column down to pressure group D. Go to RDP Table 3, follow the depth - 50ft - across to meet D. The number in the blue box - 61 - is the allowed bottom time. I am planning to make two dives. The first dive is to 60 feet for 45 minutes, and the second dive is to 60 feet for 35 minutes. How long would I have to stay on the surface (minimum surface interval) to do these two dives safely? - correct answer 1 hour and 4 minutes - Using the Surface Interval mode on the eRDPML, enter Yes for First Dive, enter 60ft, hit enter after seeing NDL, enter 45 minutes for ABT. Enter second depth of 60ft, hit enter after seeing NDL, enter second time of 35 minutes - the minimum surface interval is 1 hour and 4 minutes.Using RDP Table 1 find the depth on the top row - 60ft - and follow the column down to the next greatest time - 47 - go across to find pressure group S. On RDP Table 3, follow the 60ft row across until you find a time in the blue box equal to or greater than 35 minutes - follow this up to pressure group F. Go to RDP Table 2, follow the F column up from the bottom until it meets the S row - the minimum surface interval is 1 hour and 4 minutes.See the RDP/eRDPML Instructions for Use booklet I dive to 56 feet for 47 minutes. After a 30 minute surface interval I do a second dive to 56 feet. Losing track of time, I notice my bottom time is now 25 minutes. According to the General Rules, what should I do? - correct answer Ascend (go up) right away to 15 feet and stay there for at least 8 minutes before going to the surface, and not dive for six hours.