STSC Drill Test Exam Questions With 100% Correct Answers 2024

STSC Drill Test Exam Questions With 100% Correct Answers 2024 The strongest motivator, according to the contemporary theory is - answerRecognition of achievement for performance. when working on scaffold 20ft high who must approve the scaffold for use - answerCompetent person; The major cause of serious industrial injuries is - answerstruck by falling object The investigation of serious or fatal mishaps should be led by - answerSenior Management When should an accident investigation begin - answerAs soon as possible, realizing that protection of the injured and prevention of a second accident will take precedence. Who is required to provide placards when offering the shipment of a hazardous material - answerShipper In which location is a commercial motor vehicle, transporting hazardous materials, is required to display placards in which of the following locations - answerFront, rear and both sides of vehicle A bench grinder should have the tool rest adjusted to within _____ inch of the wheel, and the tongue guard should be adjusted to within _____ inch of the wheel. - answer1/8" ; 1/4" Level "B" Personal Protective Equipment (PPE) is defined as - answerChemical-resistant suit with Self Contained Breathing Apparatus (SCBA) or Supplied Air (SA) with escape provisions accident costs such as loss in earning power, loss of time by supervision damage to tools and equipment, and cost of training a new worker are also called - answerindirect costs the best approach for reducing incidents involving human error is to - answerImprove system design All lanyards and vertical lifelines have a minimum breaking strength of ___ pounds per worker - answer5000 pounds The maximum storage temperature for a gas cylinder is - answer130 F The first item to complete before rigging is a sling to a load to - answerLoad test the sling at 150% of rated capacity which statement is inconsistent with the STS code of ethics and professional conduct - answerSTS certificate holders should endeavor to represent the common good of the public, without respect ot the needs of employers or clients Of the following, the least important benefit of safety and health training is - answerattitude adjustment a break in elevation of _____ requires that either steps, ramps, or ladders must be provided - answer19 inches In storage, gas cylinder must be separated from other combustible material by 20 feet or barrier that is no combustible, has 30 minute fire rating is at least - answer5 feet Effective training is enhance by using lesson plans which are designed to - answerProvide the instructor with standardized guidance for training session when advising on decisions about a workplace safety, STS should - answerLimit their advice and recommendation to those areas they have knowledge on As an employee, without eye protection, is observed installing parts at a bench. This is not a hazardous operation, but it is posted "eye protection" area. Which of the following is the best course of action - answerContact the supervisor and discuss the situation What is the definition of the management term "span of control" - answerThe number of subordinates manager can supervise A CSP and licensed professional engineer asks a supervisor to informally review a series of fall protection plans for a warehouse construction project. The supervisor has adequately reviewed these types of plans for years, although without an engineering degree or formal fall protection system design education. which statement most represents a reasonable interpretation of the STS code of ethics - answerSTS code of ethics permits STSs to engage in work when they re qualified by experience in the specific technical fields involved, as well by education The one function that will always be filled at every emergency incident regardless of size is the - answerIncident commander Shipping Hazardous waste requires an accompanying - answerHazardous Waste Manifest Removing shoring from a trench must be performed - answerbottom to top Eye protection required for workers exposed to welding operations or individual observing welding operations includes - answerFlame proof screens or googles the rate of heat loss from exposed skin cause by wind and cold is defined as - answerWind chill which activity is designed to verify if the management system is working, the emergency management administrative function is adequate and all lines of communication are operating - answerTabletop Stairways should have handrails installed at ____ from the surface of the tread to the upper surface of the handrail - answer33'' What is the color that OSHA has designated for providing instruction - answerWhite How far above the work surface should the side rails of a ladder extend - answer36'' You identify a hazard when laying a pipe in a ditch. After eliminating the hazard, who has authority for determing that it is no safe for the crew to reenter the ditch - answercompetent person A crewman is experiencing heat strong. What do you do? - answerPour Cold Water on him In most organizations, who can dismiss an employee for violating a safety rule? - answerSupervisor and foreman What is the minimum height for the top rail of a suspended scaffolding guardfail? - answer36'' What right does a worker who calls in an OSHA complaint NOT have - answerContest the citation You are working on a scaffold 50 feet high. Who must approve the scaffold for use? - answerCompetent person. If you are not going to use GFCIs on the job site, what is NOT one of the requirements associated with electrical hand tools? - answerUse color coded tape on cords What does the #2 mean when it is located in the blue section of the NFPA diamond - answerHazardous What is the minimum depth that a professional engineer is required to design a shoring system? - answer20'' What is the first thing that should be checked before crane set up begins? - answerOverhead hazards, such as power lines. Who can best tell you how to operate a tool safely? - answerManufacturer instruction manual The noise level exceed permissible limits. What should be done? - answerProvide at least two types of hearing protection; Instruct employees on proper use/wearing