Tattoo Exam Prep with 100% Answers | Already Passed Already Graded When the armature bar is flat on the front coil, what is the smallest gap above the rear coil? - ✔✔.010 What does a smaller gap above the rear coil cause? - ✔✔More power What should the armature bars be made of? - ✔✔Plain steel How does a machine run if too much of the coil is showing? - ✔✔Hot What type of edges should your contact screw have? - ✔✔Rounded and smooth Where on the front spring should the contact screw be hitting? - ✔✔Front and end of spring What length of spring would run faster? - ✔✔Short spring with high angle What type of metal should the contact screw be made of to have the highest conductivity? - ✔✔Brass How does the armature bar hit the front coil core? - ✔✔Flat, full contact What do you want the frame on your tattoo machine to be? - ✔✔Non -conductive What happens when your machine is conductive and electrified? - ✔✔The armature bar sticks to the coils causing the matching to stay in an "on" setting What diameter should your post bin ding be? - ✔✔5/16 What happens if you use a steel contact screw? - ✔✔Can cause unwanted spark When setting up your machine, why would you "snug" down the eye of the needle bar? - ✔✔This helps to prevent weak and jumpy lines Why is a once -piece contact s crew the best choice? - ✔✔Screws with things added on top can cause vibration What are the two advantages of to using a brass contact screw? - ✔✔100% conductive and keeps its shape longer than other choices How much if the contact screw should be touchin g the front spring? - ✔✔A tiny contact area Why should you use plain steel for a spring rather than a coated spring? - ✔✔The coating wears away quickly, which causes a bad connection What kind of reaction can you expect from a machine with a very low spr ing angle? - ✔✔Spongy and weak Which type of machine benefits the best from a shorter spring? - ✔✔A liner Which spring is the most important for tuning the machine? - ✔✔The rear spring A machine that is very hard hitting and fast running moves the needle in and out of the skin so fast that _____? - ✔✔It doesn't leave enough pigment behind What is the ideal width of the springs used on the machine? - ✔✔The springs should be just as wide as the part they're attached to What types of screws should you use to hold the coils to the frame? - ✔✔Always use a magnetic screw that sits flush to the frame What is the function of the tube vise? - ✔✔Firmly hold the tube in place and properly align t he tube while the machine is in use How should a tube vise hold a tube in comparison to the machine? - ✔✔Squarely front to back and side to side What is the most important part of a tattoo machine? - ✔✔Coils What is the purpose of the coils of a tattoo machine? - ✔✔To run consistently and not lose power What is a possible reason for the machine to not work at all? - ✔✔There is debris between the contact screw and the front spring What can cause the coils to be in a constant "on" position? - ✔✔A coil wi re, soldering lug, or any of the electrical circuit touching the frame What does your frame act as for a coil circuit? - ✔✔The ground What is not a purpose of the binding posts? - ✔✔Electrical contact from the soldering lugs to the contact screw What is a safety feature of the cartridge needles? - ✔✔If the cartridge is not installed in the machine or tube, then the needles are not exposed; this limits the possibility of needle stick What does EPA stand for? - ✔✔Environmental Protection Agency What does FDA stand for? - ✔✔Food and Drug Administration What does "high level disinfectant" mean? - ✔✔A chemical agent, registered with the EPA, which has demonstrated tuberculocidal activity "Office" in the tattoo laws refers to what? - ✔✔Health licensing Office What attributes does a container have to have to be considered a "Sharps" container? - ✔✔Puncture -
resistant, leak proof, labeled with a biohazard symbol How many hours are part of th e tattoo licensing program? - ✔✔360 hours consisting of 210 theory hours and 150 practical hours What does a completed procedure mean? - ✔✔A tattoo which has been finished on a live human being, including any touchips or additional work following initial healing, and the client is released from service. How long is a tattoo license active for? - ✔✔1 year What documents does one have to have to apply for a tattoo license? - ✔✔Completed application, bloodborne pathogen training certificate, CPR/first aid t raining certificate, government issues ID, high school diploma or GED equivalent, and training from a tattoo program approved by the Higher Education Coordinating Commission How long is a temporary tattoo license good for? - ✔✔Not to exceed 30 consecutive calendar days. How many times in a 12 -month period can one person apply for a temporary tattoo license? - ✔✔2 How often does a licensed tattoo artist need to renew their license? - ✔✔Once a year A license can be inactive for how long before considered an expired license? - ✔✔3 years How many hours of continuing education does a licensee have to complete in 1 year? - ✔✔10 hours
resistant, leak proof, labeled with a biohazard symbol How many hours are part of th e tattoo licensing program? - ✔✔360 hours consisting of 210 theory hours and 150 practical hours What does a completed procedure mean? - ✔✔A tattoo which has been finished on a live human being, including any touchips or additional work following initial healing, and the client is released from service. How long is a tattoo license active for? - ✔✔1 year What documents does one have to have to apply for a tattoo license? - ✔✔Completed application, bloodborne pathogen training certificate, CPR/first aid t raining certificate, government issues ID, high school diploma or GED equivalent, and training from a tattoo program approved by the Higher Education Coordinating Commission How long is a temporary tattoo license good for? - ✔✔Not to exceed 30 consecutive calendar days. How many times in a 12 -month period can one person apply for a temporary tattoo license? - ✔✔2 How often does a licensed tattoo artist need to renew their license? - ✔✔Once a year A license can be inactive for how long before considered an expired license? - ✔✔3 years How many hours of continuing education does a licensee have to complete in 1 year? - ✔✔10 hours
