Asbestos Test Study Guide Exam Questions With 100% Correct Answers

Asbestos Test Study Guide Exam Questions With 100% Correct Answers Category 1 nonfriable asbestos-containing material (AMC) - answermeans asbestos- containing packages, gaskets, resilient floor covering, and asphalt roofing products containing more than 1 percent asbestos as determined using the method specified in appendix E, subpart E, 40 CRF part 763, section 1, Polarized Light Microscopy Category II nonfiriable AMC - answermeans any material, excluding Category I nonfirable AMC, containing more than 1 percent asbestos as determined using the method specified in appendix E, subpart E, 40 CRF part 763, section 1, Polarized Light Microscopy that , when dry, cannot be crumbled, pulverized, or reduced to powder by hand pressure Demolition - answermeans the wrecking of tacking out of any load-supporting structural member of a facility together with any related handling operations or the international burning of any facility Friable asbestos material - answermeans any material containing more than 1 percent asbestos as determined using the method specified in appendix E, subpart E, 40 CRF part 763, section 1, Polarized Light Microscopy that , when dry, can be crumbled, pulverized, or reduced to powder by hand pressure. If the asbestos content is less than 10 percent as determined by a method other than point counting by polarized light microscopy (PLM), verify the asbestos content by point counting using PLM. Regulated asbestos-containing material (RAMC) - answermeans (a) Friable asbestos material, (b) Category I nonfriable AMC that has become friable, (c) Category I nonfirbale AMC that will be or has been subjected to sanding, grinding, cutting, or abrading, or (d) Category II Nonfirable ACM that has become crumbled, pulverized, or recorded, or reduced to powder by the forces expected to act on the material in the course of demolition or renovation operations regulated by this subpart Renovations - answermeans altering a facility or one or more facility components in any way, including the stripping or removal of RAMC from a facility component. Operations in which load-supporting structural members are wrecked or taken out of demolitions. Visible emissions - answermeans any emissions, which are visually detectable with out the help of instruments, coming form RAMC or asbestos-containing waste material, or form any asbestos milling, manufacturing, or fabricating operations. This does not include condensed, uncombined water vapor 61.145 Standard for demolition and renovation (a) 1 (i) - answerAt least 80 linear meters (260 linear feet) on pipes or at least 15 square meters (160 square feet) on another facility components 61.145 Standard for demolition and renovation (a) 1 (ii) - answerAt least 1 cubic meter (35 cubic feet) off facility components where the length or area could not be measured previously Asbestos containing material (AMC) ~ Schools - answerwhen referring to school buildings means any material or product which contains more than 1 percent asbestos. Asbestos-containing building material (ACBM) ~ Schools - answermeans surfacing AMC, thermal system insulation, or miscellaneous AMC that is found in or on interior structural members of other parts of a school building Functional Space ~ Schools - answermeans any room, group of rooms, or homogeneous area (including crawl spaces or the space between a dropped ceiling and the floor or roof deck above), such as classroom(s), a cafeteria, gymnasium, hallway(s), designated by a person accredited to prepare management plans, design abatement projects, or conduct response actions Homogeneous area - answermeans any area of surfacing material, thermal systems insulation material, or miscellaneous material that is uniform in color and texture Miscellaneous material - answermeans interior building material on structural components or fixtures, such as floors and ceiling tiles, and does not include surfacing material or thermal system insulation Response action - answermeans a method including removal, encapsulation, enclosure, repair, operations and maintenance, that protects human health and the environment from friable ACMB Surfacing material - answermeans material in a school building that is spray-on, toweled-on, or otherwise applied to surfaces, such as acoustical plaster on ceilings ans fireproofing materials on structural members, or other materials on surfaces for acoustical, fireproofing, or other purposes Thermal system insulation - answermeans material in a school building applied to pipes, fittings, boilers, breaching , tanks, ducts, or other interior structural components to prevent heat loss or gain, or water condensation, or for other purposes 763.85 Inspections and reinspections (a) Inspections (1) - answerexceptions as provided in paragraph (a)(2) of this section, before October 12, 1988, local education agencies shall inspect each school building that they lease,