power tools NCCER Questions with solutions 2024

power tools NCCER Questions with solutions 2024 what does pneumatic mean? Air power What kind of power does a porta power use? Hydraulic power The most common use of the power drill is to what? Make holes in wood, metal, and plastic Hammer drills are designed to drill into what? Concrete, brick, and tile The electromagnetic drill is a what? Portable drill used on thick metal When cutting with a circular saw grip the saw handles________? Firmly with to hands When using a saber saw, avoid vibration by doing what? Using a clamp of vise to hold the work Before you cut through a wall or partition, always do what? Find out whats behind the wall The high speed setting on a reciprocating saw is used for what? Metal work Only use a bandsaw that has a what? Stop The end grinder is used to do what? Smooth the inside of materials, such as pipe A detailed grinder used what to smooth and polish intricate metallic work? Powder-actuated fastening systems are used to do what? Anchor static loads to steal beams. The end grinder is used to do what? smooth materials Pneumatic tools get their power from? Air Pressure. The most common use of the power drill is to? Make holes in wood, metal, and plastic. Hammer drills are designed to drill into? Concrete, brick, and tile. The electromagnetic drill is a? Portable drill used on thick metal. When cutting with a circular saw, grip the saw handles? Firmly with two hands. When using a saber saw, avoid vibration by? Using clamp or vise to hold the work. Before you cut through a wall or partition, always? Find out what is on the other side. The high speed setting on a reciprocating saw is used for? Sawing wood and other soft material. Use only a band-saw that has a? Stop. The end grinder is used to? Smooth the inside of materials, such as pipe. A detail grinder uses ____ to smooth and polish intricate metallic work. Points. Powder-actuated fastening systems are used to? Anchor static loads to steel beams. Before you begin setting up a pavement breaker for use, make sure that the air pressure is? Shut off at the main air outlet. Porta-Power cylinders are rated by how much weight they can lift and by? The distance they can move the weight . Hydraulic jacks are used when the application calls for? Extreme force to be applied. When using power tools,never engage the trigger lock Before replacing parts such as bit,blades,or discs on any tool,you must. disconnect the power source most hammer drills will not hammer until pressures is. applied to the drill bit A pneumatic drill is commonly used when there no source of electricity Never use a circular saw that does not have an upper blade guard because the. guard protects you from touching the blade. When using a circular saw,be sure to cut on the waste side of the cut mark to allow of the blade's. Kerf