IEC FINAL EXAM EXAM STUDY WITH 100% CORRECT ANSWERS 2024

IEC FINAL EXAM EXAM STUDY WITH 100% CORRECT ANSWERS 2024 Which of these is the symbol used for a 4-way switch? - ANSWER c.$4 Lighted handle toggle switches utilize a neon lamp that is illuminated when the switch is in the ___ position. - ANSWER b.OFF The ungrounded conductor is often called the ___. - ANSWER hot Drawing ___ in Figure 112.415 is a framed locking (not key-lock) type switch. - ANSWER Not D.VI or E.None of these To convert a conventional duplex receptacle into a split-wired receptacle, the ___ is removed. - ANSWER tab Refer to Figure 112.31. The light is ___. - ANSWER switched Refer to Figure 128.110. Which of the drawings shows the (3-lamp) 2 x 4 luminaire correctly connected? The "outboard" or 2-lamp ballast is to be controlled from switch #1 and the "inboard" or 1-lamp ballast is to be controlled from switch #2. - ANSWER neither I nor II The attachment cord cap (plug) shown in Figure 112.233 is connected to a table lamp. Tab 2 is connected to the ___ conductor of the branch circuit when the cord cap is plugged into a wall receptacle. - ANSWER Not ungrounded What type of switch would you use to control a lighting load from one location only? - ANSWER Single pole SPST is an abbreviation for ___. - ANSWER Single Pole-Single Throw The neutral conductor of a 120-volt circuit is referred to as the ___ conductor in the NEC®. - ANSWER grounded The "hot" conductor of a circuit is referred to as the ___ conductor in the NEC®. - ANSWER ungrounded