Dell Client Foundations Exam Questions With 100% Correct Answers 2024.

Dell Client Foundations Exam Questions With 100% Correct Answers 2024. NIC Activity LED is off and Link indicator is green. This indicates NIC is connected to a valid network at its maximum port speed but data isn't being sent/received True When the side cover of Precision Tower 7920 is not assembled, the system will still power on. False The BIOS can be accessed in a Dell System using which of the following keys: F2 What steps must be taken if there is a fan-related error message displayed at the Start up, but the system boots to the OS? NOT Check for Dust or debris on the Fans, clean them Check the System Event logs for any thermal messages or fan failures? Select the statements which are right concerning RAID 5 not It stripes the data among the drives with a parity bit Check all that applies when troubleshooting PSU issue in a Dell Precision Rack If a PSU indicates Blinking amber, this indicates Power supply is operational NOT AC PSU indicator blinks green five times at a rate of 4 Hz and turns off to indicate PSU mismatch ? Which screwdriver is recommended for removing PHM (Processor Heat Sink module) used on a Precision Rack 7920? Torx #T30 Under what scenarios can we clear the NVRAM by moving the PSWD jumper to the RTCRST pins? NOT post, power, boost not vidEO Which RAID mirrors the data between the two drives without parity? not raid0, Raid1? How many intrusion switches are there in Dell Precision Tower 7920? 1 In a scenario where the System Board is replaced, remove the Processor Heatsink Module (PHM) together with the processor. There is no need to separate the PHM from the processor. True We Import a Foreign configuration in a RAID Array, if: The array containing foreign configuration is in an Offline state USB Service Key is used for Windows OS installation and debranding (for OEM) in an Edge Gateway True Overclocking is the process of making a computer or component in a computer operate faster than specified by the manufacturer by modifying the system parameters True Which indicator shows whether power is present or a power fault has occurred