PA state inspection categories test Correct 100%
How should Suspension components be maintained? - ANSWERevery suspension component shall be in safe operating condition how should steering components be maintained? - ANSWERthe steering component should be in safe operating conditions the steering wheel shall have a minimum outside diameter of ?? - ANSWER13 inches a passenger car manufactured after June 30, 1967 and designated as a 1968 or later model shall be equipped with what? - ANSWERservice brake system with rupture failure design that doesn't not result in complete brake loss brake lines shall be approved for use as - ANSWERbrake lines what shall a vehicle specified in this chapter be equipped with? - ANSWERparking brake what should a parking brake be adequate to hold the vehicle on? - ANSWERice or snow on a 20% grade a radial ply tire shall not be used on? - ANSWERthe same axle as a belted or bias tire different types of tires - ANSWERdifferent types of tires shall not be used on the same axle unless in the event of an emergency Non-Pneumatic tires - ANSWERonly if originally equipped by the manufacturer and or an antique vehicle ice grips or studs - ANSWERmay not be equipped if they have projections greater than 2/32nds tires and rims - ANSWERmust meet or beat manufacturer specs spacers can be no thicker than - ANSWER1/4 inch what head lamp system should your vehicle be equipped with - ANSWERtwo or four head lamp system low beam candle watts must be brighter than? - ANSWER7500
Written for
- Institution
- PA state inspection categories
- Course
- PA state inspection categories
Document information
- Uploaded on
- March 11, 2024
- Number of pages
- 4
- Written in
- 2023/2024
- Type
- Exam (elaborations)
- Contains
- Questions & answers
Subjects
-
pa state inspection categories test correct 100
-
pa state inspection categories
-
how should suspension components be maintained
-
how should steering components be maintained an