Screwdrivers AMATROL exam 2024 latest update(fully solved&updated)dowload to pass

To tighten a fastener with a Phillips screwdriver, turn it in a clockwise direction while________. Exerting a downward force on the handle A(n)_______ is used to tighten and loosen hex head fasteners. Allen key The tip of a flat head screwdriver that contacts to fastener is called the _________. Blade The type of flat head screwdriver to use is determined by the size and _______ of the fastener. Location A(n)_________ is a type of threaded fastener, similar to a bolt, used to fasten parts together to create assemblies. Machine screw. When using a nut driver, it must be ____ the fastener. An exact match to the size of In a metric machine screw thread designation, pitch refers to the distance between one thread peak and the next measured in ____. Millimeters The ______ has a cross shaped tip. Phillips head screwdriver Grease or oil on the handle of a screwdriver can ____. slip out of the user's hand A(n) ________ creates a holding force by pressing against an object with its tip. Set screw Machine screws have two basic parts: the head, and the _______. Threads A set screw creates holding force by pressing against an object with its ________. Tip/point When to set screws are used, the second one is considered the lock or _______ screw. Jam To tighten a right-handed fastener with the flat head screwdriver, turn it _______. Clockwise The thickness of the straight blade screwdriver varies with the ____. Width Avoid carrying a screwdriver in your______. Pocket Never hammer or use a flat blade screwdriver as a(n)________. Chisel The Phillips screwdriver tip will__________ with the center of the fastener by itself. Align The tip of The Phillips screwdriver is shaped like a(n)______. Cross When tightening a fastener with a Phillips screwdriver, _______pressure must always be applied. Downward Phillips screwdriver tips are sized by number. Some common sizes are ______ 1,2,3,4 Phillips screwdriver handles can be made of wood or ______. Plastic