IICRC Water Restoration Course Exam with correct Answers

IICRC Water Restoration Course Exam with correct Answers what is the most critical course of action in restorative drying - Answer ️️ -to respond quickly what is the standard care for water restoration professionals developed by the restoration industry entitled - Answer ️️ -IICRC S500 to help protect technicians from the many hazards associated with contaminated water losses restores need to have ready access to several items these items protect for all - Answer ️️ - potential exposures to the body respiratory protection regulations state that the employer must provide - Answer ️️ -medical evaluations fit testing and training as a minimum medical requirement technicians performing water damage restoration services need medical consultation with their - Answer ️️ -primary health care physician for appropriate immunizations the contract clearly states the agreement between the building owner and the restoration contractor the form specifies who is responsible for payment and the terms of - Answer ️️ - payment and should be signed before work begins the most common safety hazards associated with water damaged structures results in - Answer ️️ -slips and falls federal regulations apply to the handling of - Answer ️️ -lead-based paint and asbestos after safety concerns have been addressed and the initial water source has been stopped the restore must complete an evaluation of the waters migration through the structure during this process to restore inspects all - Answer ️️ -potentially affected areas the ultimate goal is to find the edge of water migration which moves in a three-dimensional path through the structure this is accomplished across carpeted surfaces using a - Answer ️️ - moisture sensor and across most hard surfaces using a moisture meter non-penetrating moisture meter water from a clean source with no substantial risk of causing sickness or discomfort is said to be - Answer ️️ -category 1 clean water what are the has a significant degree of chemical biological and or physical contamination is - Answer ️️ -Category 2 when water intrusion results from a grossly unsanitary Source or carries - Answer ️️ - pathogenic disease causing agents it is said to be Category 3 worker and occupant health and safety are the first priority on every sewage loss areas affected by Category 3 water intrusion are marked and posted as potentially hazardous - Answer ️️ - when resistance is encountered and Performing proper services in a category 3 water loss becomes a challenge restores - Answer ️️ -stop work immediately and prevent liability losses where regulated or hazardous materials have contaminated the structure are considered - Answer ️️ -special situations Third Party Experts are commonly referred to as indoor environmental professionals or IEPs - Answer ️️ - pre-existing conditions should be identified documented and communicated to all - Answer ️️ - materially interested parties during the initial inspection when carpet delamination the loss of Integrity in the adhesives used to laminate the primary and secondary backing has occurred further damage is very likely for this reason when extensive carpet delamination is discovered ignitions must call it to the attention of all materially interested parties document the condition and - Answer ️️ -replacement there are a number of causes for carpet delamination many of them related to - Answer ️️ - improper restoration activities typical causes of carpet delamination are - Answer ️️ -folding or stretching carpet When Wet overly aggressive extraction improper specified underlay improper installation improper removal of taxes trip improper floating of carpet excessive wear pet damage hygroscopic materials gain and lose moisture continually in an effort to equalize with the water content in the surrounding air mass the more hygroscopic the material the faster it will collect water vapor and the easier it will suffer - Answer ️️ -secondary damage when water intrusion results in water running through wall cavities inspection access holes are used to ensure that blown in insulation has not compacted and lost it - Answer ️️ -r value