NCCER Module 6 Exam Questions and Answers 2024

NCCER Module 6 Exam Questions and Answers 2024 d. manufacturer's name or trademark - Answer-Identification tags for slings must include the ______. a. type of protective pads to use b. type of damage sustained during use c. color of the tattle-tail d. manufacturer's name or trademark a. fiber core - Answer-The type of wire rope core that is susceptible to heat damage at relatively low temperatures is the ______. a. fiber core b. strand core c. independent wire rope core d. metallic link supporting core c. before every use - Answer-Synthetic slings must be inspected _________. a. once every month b. visually at the start of each work week c. before every use d. once wear or damage becomes apparent b. replacement links have been used to repair the chain - Answer-An alloy steel chain sling must be removed from service if there is evidence that ___________. a. the sling has been used in different hitch configurations b. replacement links have been used to repair the chain c. the sling has been used for more than one year d. strands in the supporting core have weakened. b. hitch - Answer-A piece of rigging hardware used to couple the end of a wire rope to eye fittings, hooks, or other connections is a(n) __________. a. eyebolt b. hitch c. shackle d. U-bolt a. steel plates - Answer-A lifting clamp is most likely to be used to move loads such as ___________. a. steel plates b. piping bundles c. concrete blocks d. plastic tubing d. gear system - Answer-Chain hoists are able to lift heavy loads by utilizing a ___________. a. rope and pulley system b. rigger's strength c. stationary counterweight d. gear system b. load is properly balanced - Answer-Before attempting to lift a load with a chain hoist, make sure that the _______