Journeyman electrician exam prep 2024

Journeyman electrician exam prep 2024 What table sizes bonding jumpers for for AC systems? -Answer-250.102(C)(1) The NEC defines continuous load to be a load where max current on the circuit continues for at least how many hours? -Answer-Three To use the adjustment factors in table 310.15(B)(3)(A), you must have greater than how many current carrying conductors in a raceway? -Answer-Greater than three Where in the NEC codebook would you find EMT sizes for a given size and number of conductors? -Answer-Annex C, Table C.1 Section 210.20(A) states that the over current protection for branch circuits including continuous loads must be greater than 100% of the noncontinuous plus ____ of the continuous load. -Answer-125% Liquidtight Flexible Metal Conduit shall be fastened within of each box or other conduit termination -Answer-Twelve inches 314.28(A)(1) states that straight pulls in pull boxes with conductors size 4 AWG or larger, box length should be greater than or equal to times the trade diameter of the largest conduit entering box. -Answer-Eight Chapter 9 note 4 states conduit nipples less than 24 inches can fill to a max of their cross sectional area -Answer-60 percent Table 348.22 gives the max number of insulated conductors in size _______ FMC? - Answer-3/8 (trade size) Guest rooms of hotels, motels, & sleeping rooms in dorms need a MIN or _____ general purpose receptacles installed that are readily accessible? -Answer-Two