OSHA 30 Module 20 Process Safety Management Latest Version Rated A+

OSHA 30 Module 20 Process Safety Management Latest Version Rated A+ Employers must certify that they have carefully applied all the applicable provisions of the PSM standards at least every_____. 3 years Information on the equipment in the process, as spelled out in 1910.119 and 1926.64(d)(3), must include all of the following EXCEPT: An operator's guide Safe work practices should be developed for the control of hazards in all these operations EXCEPT: Evacuating hazardous areas OSHA provides rules regarding information on the technology of the process which must include all of the following EXCEPT: Reactivity and thermal data Catastrophic releases of hazardous chemicals must be investigated within: 48 hours In cases where equipment deficiencies are outside acceptable limits as defined by the safety management process, that equipment: May be used so long as deficiencies are corrected in a timely manner In order to comply with OSHA's Mechanical Integrity standards, operating employers must assure that equipment as it is _____ is suitable for the desired process Fabricated To assure that a process hazard analysis is consistent with the current process, it should be updated and revalidated at least every _____ years Five When operating procedures are affected by recommendations of the process hazard analysis team, the employer's must important responsibility is: Communicating changes to employees Which one of these methods IS NOT used to determine and evaluate process hazards? If- then analysis