EPA Type III Questions and Answers 100% Pass

EPA Type III Questions and Answers 100% Pass What type of equipment can be worked on with Type III certification? - Answer ️️ -low pressure The most efficient method of leak checking a charged low-pressure refrigeration unit is to - Answer ️️ -pressurize the system by the use of controlled hot water or heater blankets When pressurizing a system, do not exceed - Answer ️️ -10 psig After reaching the required vacuum on an appliance when servicing, moisture is indicated by - Answer ️️ -multiple rises in pressure over a period of time with increase of pauses between rises EPA required evacuation levels for recovery or recycling equipment manufactured or imported before Nov. 15, 1993 is - Answer ️️ -25 inches Hg EPA required evacuation levels for recovery or recycling equipment manufactured or imported on or after Nov. 15, 1993 is - Answer ️️ -25 mm Hg absolute What can be used to pressurize a chiller system before opening the system for a non-major repair? - Answer ️️ -controlled hot water Refrigerant recovery from a system using R-11 or R-123 starts with - Answer ️️ -liquid removal and is followed by vapor recovery If a strong odor is detected during the recovery process, - Answer ️️ -a compressor burn-out may have occurred