ACI Concrete Strength Testing Technician - Practice C617/C617M Exam with 100% Correct Answers | 2024 Update

ACI Concrete Strength Testing Technician - Practice C617/C617M Exam with 100% Correct Answers | 2024 Update Planeness, perpendicularity - Answer ️️ -These procedures for capping enable concrete cylinders and cores to meet the standard practice's requirements for ___ and ___. Plates, alignment, melting - Answer ️️ -Equipment needed for the capping process includes capping ___, ___ devices, and ___ pots. Glass, metal, granite, or diabase - Answer ️️ -Plates for neat cement and high-strength gypsum plaster caps should be made of ___, ___, or ___. Metal, stone - Answer ️️ -Sulfur mortar cap plates should be formed against ___ or ___ plates. True - Answer ️️ -T/F: The purpose of the guide bar or bull's eye level is to ensure that caps remain perpendicular to the axis of the cylinder with 0.5 degrees. Peripheral heating - Answer ️️ -To avoid accidents during reheating of cooled sulfur, use melting pots that have ___ ___. Neat cement paste - Answer ️️ -The technician should use a stiff layer of ___ to cap fresh concrete cylinders. High-strength gypsum paste, neat cement paste, or sulfur mortar - Answer ️️ -Hardened concrete cylinders should be capped with ___, ___, or __. False - Answer ️️ -T/F: Plaster of paris and mixtures of plaster of paris and portland cement are examples of suitable strength plasters. 35 MPa {5000 psi}, the cylinder strength - Answer ️️ -Sulfur mortars and high-strength gypsum cement cubes must demonstrate a minimum compressive strength of ___ or ___, whichever is greater.