TestOut Network Pro Ch 3 and 4 (3.1.3, 3.1,4, 3.1.5, 3.2.3, 3.2.4, 3.2.5, 3.1.3, 3.1.4, 4.1.3, 4.2.3, 4.2.4, 4.3.3, 4.3.4, 4.4.5, 4.4.6, 4.4.7, 4.4.8, 4.4.9, 4.4.10) Exam 2024

TestOut Network Pro Ch 3 and 4 (3.1.3, 3.1,4, 3.1.5, 3.2.3, 3.2.4, 3.2.5, 3.1.3, 3.1.4, 4.1.3, 4.2.3, 4.2.4, 4.3.3, 4.3.4, 4.4.5, 4.4.6, 4.4.7, 4.4.8, 4.4.9, 4.4.10) Exam 2024 You are a network technician for a small corporate network. The Support Manager recently decided to add a new workstation to the network to handle an upcoming project in her department. To accommodate specific network communication needs for this project, you need to upgrade the network connection speed for the workstation in the Support Office. -Answer-- Install the 1000BaseTX network adapter in the Support workstation -Connect the Support workstation to the network using a Cat5e cable -Verify that the Support workstation can communicate with the Internet Explanation Select the 1000BaseTX network adapter and reconnect the Cat5e cable. The 1000BaseTX network adapter supports Gigabit Ethernet. Complete the following steps: 1. In the Support Office, switch to the motherboard view of the computer (turning off the workstation as necessary). 2. On the Shelf, expand the Network Adapters category. 3. Identify the network adapter that supports Fast Ethernet 1000BaseTX. Drag the network adapter from the Shelf to a free PCI-E slot on the computer. 4. To connect the computer to the network, switch to the back view of the computer. 5. Drag the Cat5 cable connector from the motherboard's NIC to the port of the 1000BaseTX network adapter. 6. To verify the connection to the local network and the Internet, switch to the front view of the computer. 7. Click the power button on the computer case. 8. After the workstation's operating system is loaded, click the networking icon in the Task Bar and click Open Network and Sharing Center. The diagram should indicate an active connection to the network and the Internet.