Plumbing Journeyman Exam with correct Answers
True (IPC 425.4) - Answer- A 4-inch by 3-inch closet bend shall be acceptable. T/F
10 (IPC 403.1) - Answer- What is the minimum number of toilets in an educational facility men's room if the facility enrolls 500 people?
accessable - Answer- "Drinking fountains shall be located on a/an ____________ route."
2" (IPC 406.2) - Answer- What is the minimum waste connection for an automatic clothes washer?
30", 56" (IPC 405.3.1) - Answer- Water closet compartments shall be not less than _____ inches in width and _____ inches in depth for wall-hung water closets.
approved (IPC 402.1) - Answer- Plumbing fixtures shall be constructed of _______________ materials.
12", 60" (IPC 405.3.5) - Answer- The walls or partitions shall begin at a height not greater than _____ inches from and extend not less than _____ inches above the finished floor surface.
False, 120 degrees (IPC 412.5) - Answer- The hot water supplied to bathtubs and whirlpool bathtubs shall be limited to not greater than 110°F. T/F
30", 60" (IPC 405.3.1) - Answer- Water closet compartments shall be not less than _____ inches in width and not less than _____ inches in depth for floor-mounted water closets.
1/4" (IPC 421.3) - Answer- Removable shower strainers openings shall not be less than _______ inches in least dimension.
1 1/4" (IPC 419.3) - Answer- What is the minimum waste connection for a lavatory?
2' (IPC 413.3) - Answer- What is the minimum waste connection for a floor drain?
True (IPC 405.4) - Answer- The (toilet) flange shall be attached to the drain and anchored to the structure. T/F 30 (IPC 405.3.5) - Answer- The horizontal dimension between walls or partitions at each
urinal shall be not less than _____ inches.
prohibited - Answer- Any water closet that permits siphonage of the contents of the bowl
back into the tank shall be __________. Trough urinals shall be __________. T/F
two (IPC 403.1.3) - Answer- Where _________ or more toilet rooms are provided for each sex, the required number oflavatories shall be distributed proportionately to the required number of water closets.
False. 120 degrees (IPC 412.10) - Answer- Head shampoo sink faucets shall be supplied with hot water that is limited to not more than 110°F (49°C) by a water-
temperature-limiting device. T/F
1 1/2" (IPC 407.2) - Answer- What is the minimum waste connection for a bathtub?
3" (IPC 413.4) - Answer- In public coin-operated laundries . . . drains shall have an outlet of not less than _____ inches in diameter.
True (IPC 403.1.1) - Answer- To determine the occupant load of each sex, the total occupant load shall be divided in half. T/F
405.6 - Answer- Which code section states that "Joints formed where fixtures come in contact with walls or floors shall be sealed." ?
22 (IPC 421.4.2) - Answer- The shower compartment access and egress opening shall have a clear and unobstructed finished width of not less than _____ inches.
1 1/2" (IPC 422.2) - Answer- What is the minimum waste connection for a sink?
500 (IPC 403.3.3) - Answer- In public and employee toilet facilities, the path of travel to such facilities shall not exceed a distance of _______ feet.
3" (IPC 421.3) - Answer- Removable shower strainers shall not be less than _______ inches in diameter.
Trap seal, Trap outlet, Trap inlet (IPC 405.9) - Answer- Which three locations are slip joint connections allowed?
None required (IPC 411.2) - Answer- What is the minimum waste connection for an eye wash station?
False (IPC 403.1) - Answer- The occupant load for seasonal outdoor seating and entertainment areas shall not be included when determining the minimum number of facilities required. T/F
True (IPC 425.4) - Answer- A 4-inch by 3-inch closet bend shall be acceptable. T/F
10 (IPC 403.1) - Answer- What is the minimum number of toilets in an educational facility men's room if the facility enrolls 500 people?
accessable - Answer- "Drinking fountains shall be located on a/an ____________ route."
2" (IPC 406.2) - Answer- What is the minimum waste connection for an automatic clothes washer?
30", 56" (IPC 405.3.1) - Answer- Water closet compartments shall be not less than _____ inches in width and _____ inches in depth for wall-hung water closets.
approved (IPC 402.1) - Answer- Plumbing fixtures shall be constructed of _______________ materials.
12", 60" (IPC 405.3.5) - Answer- The walls or partitions shall begin at a height not greater than _____ inches from and extend not less than _____ inches above the finished floor surface.
False, 120 degrees (IPC 412.5) - Answer- The hot water supplied to bathtubs and whirlpool bathtubs shall be limited to not greater than 110°F. T/F
30", 60" (IPC 405.3.1) - Answer- Water closet compartments shall be not less than _____ inches in width and not less than _____ inches in depth for floor-mounted water closets.
1/4" (IPC 421.3) - Answer- Removable shower strainers openings shall not be less than _______ inches in least dimension.
1 1/4" (IPC 419.3) - Answer- What is the minimum waste connection for a lavatory?
2' (IPC 413.3) - Answer- What is the minimum waste connection for a floor drain?
True (IPC 405.4) - Answer- The (toilet) flange shall be attached to the drain and anchored to the structure. T/F 30 (IPC 405.3.5) - Answer- The horizontal dimension between walls or partitions at each
urinal shall be not less than _____ inches.
prohibited - Answer- Any water closet that permits siphonage of the contents of the bowl
back into the tank shall be __________. Trough urinals shall be __________. T/F
two (IPC 403.1.3) - Answer- Where _________ or more toilet rooms are provided for each sex, the required number oflavatories shall be distributed proportionately to the required number of water closets.
False. 120 degrees (IPC 412.10) - Answer- Head shampoo sink faucets shall be supplied with hot water that is limited to not more than 110°F (49°C) by a water-
temperature-limiting device. T/F
1 1/2" (IPC 407.2) - Answer- What is the minimum waste connection for a bathtub?
3" (IPC 413.4) - Answer- In public coin-operated laundries . . . drains shall have an outlet of not less than _____ inches in diameter.
True (IPC 403.1.1) - Answer- To determine the occupant load of each sex, the total occupant load shall be divided in half. T/F
405.6 - Answer- Which code section states that "Joints formed where fixtures come in contact with walls or floors shall be sealed." ?
22 (IPC 421.4.2) - Answer- The shower compartment access and egress opening shall have a clear and unobstructed finished width of not less than _____ inches.
1 1/2" (IPC 422.2) - Answer- What is the minimum waste connection for a sink?
500 (IPC 403.3.3) - Answer- In public and employee toilet facilities, the path of travel to such facilities shall not exceed a distance of _______ feet.
3" (IPC 421.3) - Answer- Removable shower strainers shall not be less than _______ inches in diameter.
Trap seal, Trap outlet, Trap inlet (IPC 405.9) - Answer- Which three locations are slip joint connections allowed?
None required (IPC 411.2) - Answer- What is the minimum waste connection for an eye wash station?
False (IPC 403.1) - Answer- The occupant load for seasonal outdoor seating and entertainment areas shall not be included when determining the minimum number of facilities required. T/F
