NICET Practice Fire Alarm Systems Level I Task 1.2.1 complete study guide

NICET Practice Fire Alarm Systems Level I Task 1.2.1 complete study guide Listed and labeled smoke product acceptable to the manufacturer - Which of the following is an acceptable method for performing a smoke entry test of a spot type smoke detector? 85% - Equipment sha ll be designed so that it is capable of performing its intended function at ____ % of its nameplate voltage. 200 seconds - Insulation conductors shall be monitored for integrity. The occurrence of a simple open for single ground fault conditions shall be automatically indicated within ____ seconds. 24 Hours - Tests of all circuits extending from the central station shall be made at intervals of not more than Building Owner - If a system malfunction is not corrected at the conclusion of inspection, test, or maintenance, the ___ shall be notified in writing within 24 hours. Multiply current times resistance - Using Ohms law, how is voltage calculated? Riser Di agram - What type of drawing typically shows correct conductor counts? For one year - For supervising station fire alarm systems, records pertaining to signals received that result from testing shall be maintained: Functional test per manufacturer's inst ructions - Which of the following test all required for smoke alarms in one and two family dwellings? Asbuilt Drawings - What type of drawings should be presented to the building owner after acceptance testing?