ASE: Steering and Suspension Questions and Answers 100% Pass

ASE: Steering and Suspension Questions and Answers 100% Pass How would you adjust a rack yoke bearing? - Answer ️️ -Tighten, then look at OEM specifications and back off by the suggested amount of degrees. If a customer states that their steering wheel turns more to the left than to the right, what are some of the most likely causes? - Answer ️️ -- Incorrectly timed steering gear - Bent pitman arm - Bent tie rod A customer says that their vehicle is difficult to steer, but only in one direction. What is the most likely cause? - Answer ️️ -A faulty or leaking power steering gear. What could a shifted front cradle affect? - Answer ️️ -- Front camber - Front caster - Thrust angle What is one thing that spring eye bushings and worn strut bushings could cause? - Answer ️️ - A pull on acceleration and deceleration. Why is camber angle important? - Answer ️️ -It is a tire wear angle and can cause a pull in the steering. What could happen if a composite leaf spring is scratched during installation? - Answer ️️ -If the spring is dented or scratched it will be weakened and break more easily. Vehicles with high caster settings are most likely to use a ___________ ____________ to help control front-wheel shimmy - Answer ️️ -Steering damper A popping noise while turning the steering wheel is most likely caused by? - Answer ️️ -Worn front tie rods What is the most likely cause of a power steering hose leaking on a vehicle? - Answer ️️ - Separated motor mounts What angle has the greatest affect on steering wheel return? - Answer ️️ -Caster