NCCCO Overhead Crane Test (New 2023/ 2024 Update) Questions and Verified Answers| Graded A| 100% Correct

NCCCO Overhead Crane Test (New 2023/ 2024 Update) Questions and Verified Answers| Graded A| 100% Correct QUESTION What should an operator first determine before making a lift? Answer: weight of the load QUESTION A wire rope designated as 6 X 19 has? Answer: 6 strands with 19 wires QUESTION What is the safe working load (SWL) of a wire rope defined as? Answer: breaking strength divided by safety factor QUESTION What is the vertical movement of an overhead crane controlled by? Answer: hoist controller QUESTION Swinging loads can be controlled by the use of the ? Answer: bridge or trolley controls QUESTION What is the first step in a daily inspection? Answer: main switch locked in off position QUESTION If the load does not balance properly after being raised, what step should be taken? Answer: lower the load to the ground QUESTION When making a lift, what position should the trolley be in? Answer: vertical to the load QUESTION What position should all controllers be in when energizing? Answer: either neutral or off QUESTION ASME B.30.2 states that the minimum number of wraps on the hoisting drum should never be less than ______________unless a lower limit device is provided. Answer: two wraps QUESTION Before leaving a crane cab unattended, any attached load shall be? Answer: landed QUESTION What is the purpose of the upper limit switch (t