State Farm Estimatics Exam 2023/2024 already graded A+

State Farm Estimatics Exam

The formula for determining the area of a trapezoid is:

Select the single best answer:
A. [(Base1 + Base2) ÷ 2] x Height
B. ½ Base x Height
C. Base x Height
D. 𝜋𝜋𝑟𝑟 (pi r squared) - ANS[(base1+base2) / 2] * height

The formula for determining the area of a triangle is:

Select the single best answer:
A. 𝜋𝜋𝑟𝑟 (pi r squared)
B. [(Base1 + Base2) ÷ 2] x Height
C. Base x Height
D. ½ Base x Height - ANSD. ½ Base x Height

The formula for determining the area of a circle is:

Select the single best answer:
A. ½ Base x height
B. 𝜋𝜋𝑟𝑟 (pi r squared)
C. [(Base1 + Base2) ÷ 2] x Height
D. Base x Height - ANSB. 𝜋𝜋𝑟𝑟 (pi r squared)

"On-center" is a term to describe the distance from the center of one framing member to the
center of the next framing member, i.e., studs, joist, rafters.

TrueFalse - ANSTrue

Select the False statement:

Select the single best answer:

A. Plywood, oriented strand board (OSB), fiberboard, and rigid insulating panels are widely used
for sheathing.
B. Wall sheathing reinforces the wall framing.
C. Sheathing adds rigidity, strength and some insulating qualities to the wall of a structure.
D. Sheathing provides a flat surface backing for other products, such as siding.
E. The thickness of the sheathing has no affect on the cost of the material. - ANSb. Wall
sheathing reinforces the wall framing.

, Which of the following components is not a part of a roof truss?
Select the single best answer:
A. Top Chord
B. Bottom Chord
C. Web
D. Bird's Mouth
E. Gussets - ANSBirds Mouth

Spaced (open) sheathing is normally used with composition shingles.
TrueFalse - ANS

Composition shingles can be purchased in bundles which could be ⅓ square or ¼ square.
TrueFalse - ANSTrue

Blanket insulation is an uncut roll of insulation cut to length at the job site. It is used in walls and
attics, and may or may not have a backing material.
TrueFalse - ANSTrue

Select the false statement.
Select the single best answer:

A. Composition shingle weights range from 120 lb. to 480 lb. per square.
B. Composition shingles are made of fiberglass or asphalt saturated roofing material embedded
with mineral granules.
C. Wood roofing is generally divided into two categories, wood shingles and wood shakes.
D. Rigid roofing materials include clay, concrete, metal, and slate.
E. All of the above are true. - ANSComposition shingle weights range from 120 lb. to 480 lb. per
square.

Non-masonry siding products such as wood, aluminum, vinyl, steel, and vinyl clad siding are
usually measured by the square foot, but the materials are typically sold by the square (100 SF)
or by the piece.
TrueFalse - ANSTrue

Select the false statement.
Select the single best answer:
A. Vinyl clad siding is steel siding with a vinyl coating over it. It is more dent-resistant than steel.
B. Vinyl siding is made of a rigid polyvinyl-chloride (PVC) compound. It is tough, durable, and
economical.
C. Aluminum siding has a baked-on enamel factory finished and can provide an appearance
closely resembling painted wood siding.
D. Vinyl clad siding is aluminum siding with a vinyl coating over it. It is more dent resistant than
aluminum and has less tendency to crack than vinyl.