NEIEP 800 Final Exam V2 (New 2023/ 2024 Update) Questions and Verified Answers| 100% Correct| Graded A

NEIEP 800 Final Exam V2 (New 2023/ 2024 Update) Questions and Verified Answers| 100% Correct| Graded A QUESTION Belted walkways use a tensioning device at the tail end to maintain the proper tension on the treadway belt and is normally maintained at _____ lbs. Answer: 3000 QUESTION (True/False) The speed governor switch on moving walks not driven by an induction motor directly connected to the driving machine (aka AC squirrel cage), will cause power to be removed from the motor and brake if the treadway speed exceeds a predetermined value, not to exceed 20% of maximum designed speed. This device shall be manually resettable. Answer: True QUESTION Ensure comb segment teeth are set in the slots of the treadway deep enough so the teeth are always _____ the upper surface of the treads. Answer: below QUESTION (True/False) LULA's must provide a permanent mechanical holding device to mechanically stop and hold the car between 35 and 79 inches above the pit floor and must be held 24 inches minimum above the bottom sill. Answer: True QUESTION LULA maximum rise is _____ ft Answer: 25 QUESTION Residential elevator maximum platform area is _____ sq ft Answer: 15 QUESTION Hydraulic overspeed valves will stop a downward traveling car if it exceeds speeds rated between _____ and _____ percent. Answer: 110, 140 QUESTION Car door switches are required to operate n