INDIANA NAIL TECHNOLOGY STATE BOARD

All implements used by a tech shall be ____________ prior to use on a customer. - Answer- Disinfected Before putting nonporous implements into a disinfectant implements shall be precleaned with __________. - Answer- Soap and fresh hot water After cleaning, implements shall be _______ thoroughly and ________. - Answer- Rinsed and dried Nonporous implements shall be fully immersed in an EPA registered tuberculocidal, bactericide, parricide, and fungicide for __________. - Answer- 10 minutes or according to manufacturer's instructions All porous nail files must be cleaned and sprayed with _______________. - Answer- at least 70% isopropyl alcohol or 10% bleach solution All porous nail file that has come in contact with ______________ must be thrown away. - Answer- Blood, bodily fluids or unhealthy skin or nails All metal electric file drill bits must be disinfected with - Answer- an EPA registered tuberculocidal, bactericide, viricide, and fungicide for 10 minutes or according to manufacturer's directions OR at least 70% isopropyl alcohol OR 10% bleach solution All ________ must be thrown away after one time usage. - Answer- Sandpaper electric file drill bits A nail techs shall make sure to immediately before serving each customer. - Answer- wash hands with soap and fresh hot water or waterless hand sanitizer A nail techs shall make sure to ________ has been cleaned - Answer- assure that the table where a customer is receiving services A nail techs shall make sure to use a _______ for each customer. - Answer- clean towel A nail techs shall make sure to manicure bowls and pedicure basins, tubs, and footbaths must be disinfected before serving each customer in the following manner: - Answer- -remove all debris and wash the basin or tub