CWB Codes and Standards (Practice Test Questions) correctly answered graded A+ 2023/2024

CWB Codes and Standards (Practice Test Questions) The AWS D1.1 Structural Welding Code-Steel - correct answer includes welding procedure and performance qualification requirements The CSA is one organization accredited by the Standards Council of Canada for developing standards related to joining and inspection. Name another one. - correct answer Canadian General Standards Board (CGSB) Which Canadian standard includes ferrous and non-ferrous materials with notch toughness and includes aluminum piping systems? - correct answer CSA Z662 True or false: "Provisions for pre-qualified procedures are included in CSA W59.2 and AWS D1.2 standards/Codes for fabricating aluminum and its alloys". - correct answer False CSA S473 - correct answer includes a comprehensive fracture control plan. Most standards are created by: - correct answer voluntary efforts In Canada, shop inspections of pressure vessels are performed by: - correct answer an inspector employed by the regulatory authority in the province of fabrication. What are the three main categories of qualified personnel required by CSA W47.1 and CSA W47.2? - correct answer Welding Engineer, Welding Supervisor, Welder Which of the following codes/standards do not deal with fabrication, but include the qualification of welding procedures and welding personnel? - correct answer ASME Section IX T/F - AWS D17.1 was developed in part to replace MIL-STD-1595 and MIL-STD-2219. - correct answer True The function of standards can be said to: - correct answer Educate, simplify, certify and protect T/F - "Generally the word "shall" in a standard means that the user of the standard is obliged to satisfy the condition". - correct answer True CSA W59 allows for the use of what materials? - correct answer carbon steels and low-alloy steels Which code/standard does CSA B51 refer to for the qualification of welding procedures? - correct answer ASME IX The CAN/CSA Standard N285.6 Series covers the qualification and welding requirements for: - correct answer thin walled zirconium tubing T/F - CAN/CSA S473 introduces a Fracture Control Plan. - correct answer True AWS D1.1 does not allow for the pre-qualification of procedures welded with which of the following? - correct answer GMAW - Short Circuit and ESW T/F - "ASME IX is a design standard." - correct answer False The area(s) not covered by the ISO is (are) - correct answer electrical and electronic T/F - The Canadian Council of the International Institute of Welding is a member of the IIW. - correct answer True