SENSE welding inspection and testing principles Exam All Possible Questions and Answers with complete solution

A weld having a triangular cross section which is applied to a T-joint, corner joint or lap joint is called a A) Butt B) T C) Fillet D) corner - Answer C) fillet A weld produced by filling an elongated hole in an overlapping member, fusing it to the member beneath is called a A) Flange weld B) spot weld C) seam weld D) slot weld - Answer D) slot weld True or False/ a fillet is a type of weld joint? - Answer False---- Butt T and Corners are weld joints A weld used to build up thin surfaces and to provide a layer of corrosion protection and/or abrasionresistance is called a A) edge weld B) flare weld C) flange weld D) surfacing weld - Answer D) surfacing weld The portion of the joint where the two pieces to be joined come closest together is called the A) bevel B) Joint root C) groove angleD) root face - Answer B) joint root The height of a weld above the base metal in a groove weld is the A) crown of the weld B) weld buildup C) weld reinforcement D) face of the weld - Answer C) weld reinforcement A ___________ fillet weld has the same leg and size dimensions A) equal leg B) concave C) convex D) unequal leg - Answer A) equal leg A weld formed by progressing along the joint with a side to side motion is called a? - Answer weave bead The base material next to the weld that is NOT melted, but undergoes structural and metallurgical changes is called the? - Answer H.A.Z. heat affected zone The problem occurring in weldments due to the non-uniform heating produced by welding is called. A) porosity B) incomplete fusion C) distortion D) slag inclusion - Answer C) distortion The most common type of destructive testing of welds is called. A) tensile testing B) bend testingC) break testing D) fillet break testing - Answer B) bend testing