NISP Fire Safety Professional Exam Questions With 100% Correct Answers.

Oxygen, heat, and fuel - To ignite and sustain a fire, a chemical reaction or spark is combined with: each chemical transported, produced or used on site. - An SDS (Safety Data Sheet) is required for: heat - The condition of warming measured by rising degree is: All over the building - Sprinklers are effective because they release an extinguishing agent: 4-step process to use a fire extinguisher - Define PASS Grease, gas, and oil - Class B fires use the following as fuel 165 degrees - Most sprinklers activate at...: Cigarettes not fully out inside a trash can - When on patrol, watch for careless discards such as: ensure control valve is closed - When checking a sprinkler system, do the following except: 36" of cleared space at all times - Aisles and corridors should have: Activate when air temp hit a certain heat level - Heat detectors: Check the tag on the frame or door - You can tell the rating on a fire door by: fire should be in immediate are it began in - If you decide to fight a fire:Kitchens - Heat detectors are best used in: have water held back and pressurized - Dry sprinkler systems: Class B & C - A carbon dioxide fire extinguisher may be used on which class of fire: Oxygen feeds fire - Windows should be closed during a fire because: stand 8 ft away from the fire - When using an extinguisher, you should: Report it imminently - If a leak is discovered you should: Gauge, seal, nozzle, and rock it. - Three Check and a rock rule: 6 yrs - Extinguishers should be tested by a tech every: Beam of light - Photoelectric smoke detector uses: 40 - Wet sprinklers are used in areas: