Millwright Power Tools Exam Questions and Answers

Millwright Power Tools Exam Questions and Answers Drill Press - CORRECT ️️ Consists of a starionary mounted drill, a drive motor, an adjustable table, and the necessary controls, all mounted on a column with a base that is fastened to the floor or to the bench. Usually has some type of vise arrangement that fits in the table to hold the work being drilled. Special jigs are used to hold odd-shaped objects on the table. - CORRECT ️️ The Drill Press Is adjusted by positioning the belt on the appropriate pulley. - CORRECT ️️ The speed of the drill When operating any type of drill press, lighten the feed pressure _________________? - CORRECT ️️ Just before you breakthrough (also called piercing) the pierce. Hydraulic presses can be vertical or horizontal, but the _______________ type is the most common? - CORRECT ️️ Vertical Shop presses vary in size from ______________ to _____________ capacities and may be hand pumped or have electric pump to power the cylinder - CORRECT ️️ 5-, 60-Ton Can produce a great amount of pressure. If an excessive amount of pressure is applied to a part, the part could reach the breaking point without any visible indication that too much pressure is applied. - CORRECT ️️ Hydraulic Presses The only way to determine the amount of pressure being exerted by the hydraulic press is to? - CORRECT ️️ Watch the pressure Gauge