Q05 - QUIZ - BASICS OF WELDING CODE DOCUMENTATION EXAM QUESTIONS AND ANSWERS

What document(s) must be a part of the process in a welder performance qualification? Code, PQR, and WPS Which one of the following individuals can create a PQR? A welding engineer Brainpower Read More 0:04 / 0:15 What is an example of a filler material classification? E7024 A Welding Procedure Qualification is welded by a welder What conditions may affect the amount of preheat listed on a WPS? The material thickness and current air temperature The groove angle on a WPS for a V-groove weld is identified as the "included" angle. What organizational numbering system is used to identify the material specification listed on a WPS? ASTM The WPS does provide detail of the joint design. The WPS is owned by the company that paid to have the procedure written. can design a welding procedure in preparation for a Procedure Qualification. Senior Certified Welding Inspector (SCWI) The PQR is used to record the test results from the testing of a proposed welding procedure. What information is found on the WPS under flow rate? The cubic feet (liters) per hour of shielding gas used The name and ID of the welder is is not identified on a WPS. Variables in the welding process that cannot be changed are identified as_____. Essential A welding procedure specification is only used to test welders during a performance qualification test. false A WPS written for the GTAW process does not have an entry identifying the composition of the shielding gas. false The primary difference between a PQR and a WPS is that some of the variables on the WPS are stated as a range of values as dictated by the code it was written from. When a welder successfully executes a welding procedure and the procedure passes all needed testing that welder becomes a qualified welder.