OSHA Cranes questions with correct answers graded A+ 2023/2024

OSHA CranesMulti-Employer Citation Policy cites the following employers - correct answer Controlling, exposing, creating, correcting Crane types covered: - correct answer Crawler, barge, mobile, straddle, industrial, tower Crane types excluded: - correct answer Concrete pumps, backhoes, forklifts, drilling rigs, helicopters A crane is basically: - correct answer a piece of equipment with a hoist line that goes up and down A signal person must be: - correct answer Qualified and competent in the application of the types of signals used, have basic knowledge of crane operation and limitations, understand OSHA requirements Major changes in OSHA crane policy include: - correct answer ground conditions, assembly/disassembly, rigger qualification, power lines, inspections, operational aids, operator certification, signal person qualification, training Ground conditions are: - correct answer The ability of the ground to support the equipment Supporting materials are: - correct answer Blocking, mats, cribbing, or similar supporting materials Equipment must not be assembled or used unless ground conditions are: - correct answer Firm, drained, and graded to a sufficient extent so that, in conjunction with the use of supporting materials, the manufacturers specifications for adequate support and degree of level of the equipment are met The controlling entity must: - correct answer Ensure the ground preparations meet the requirements and inform the user of the location of hazards beneath the equipment set-up area If the a/d director or operator determines that the ground conditions do not meet the requirements they must: - correct answer Meet with the controlling entity regarding the ground preparations that are needed so requirements can be met New crane power lines standards: - correct answer 20' up to 350KV, 50' over 350KV Assembly disassembly clearance from power lines: - correct answer 20' Identify work zone by either: - correct answer Demarcating boundaries, defying as 360 degree radius to maximum radius If crane is within working radius of another crane: - correct answer Controlling entity must institute a system to coordinate operations Determine if any part of the equipment, load line, or load if operated within the work area: - correct answer Could get within 20' of a power line If equipment could be within 20feet of power lines (within work area): - correct answer Deenergize and visibly ground, or ensure 20' clearance, use Table A clearances If option 2 or 3 is chosen: - correct answer Conduct planning meeting, use non-conductive tag lines, use elevated warning line at minimum distance or dedicated spotter, and at least one of the following: What additional crane/power line protective measures must be used: - correct answer Proximity alarm, range control warning device, range limiting device, dedicated spotter, or insulated link Required inspection criteria on modified/repaired crane equipment: - correct answer Qualified person, prior to initial use, must include functional testing, must be in accordance with manufacturers requirements Shift inspection criteria: - correct answer Visual inspection by competent person, must make safety determination of deficiencies and pass information on to next shift