F60 Fireguard test
For hot work operation with citywide permit, the owner of the premises of the hot work operation
areas must be notified in writing by the citywide permit holder ______ the hot work is to be
started. - ANSat least 48 hours before
The pre-hot work check must be conducted by the responsible person before hot work is
authorized and __________ - ANSleast once per day.
The check reports must be kept at the work site during the work, made available for inspection
by a representative of the FDNY, and maintained on the premises for a minimum of - ANS48
hours after work is complete.
A pre-hot work check must be conducted at least - ANSonce per day
Hot work operations involving cutting or welding shall be conducted at least - ANS35 feet from
combustible materials and combustible waste
All other hot work operations shall be conducted at least - ANS25 feet from combustible
materials and combustible waste
Sprinkler system protection ____________while hot work is performed. - ANSmust not be shut
off or impaired
When should a Fire watch be maintained - ANSA fire watch must be maintained during any hot
work operation.
What other duties should the Fire Watch have while on hot water operations. - ANSThe persons
conducting a fire watch shall not have other duties.
Where hose lines are required, they shall be connected, charged and ready for operation -
ANSAt least one portable fire extinguisher with a minimum 2-A:20-B:C
How far away should one fire extinguisher be from any operation - ANS30 feet
The fire watch for torch operations conducted at the following three locations shall be conducted
by at least one F-60 fire guard - ANS(1)Construction sites.
(2)In any building or structure, when the torch operation is conducted by a person holding a
citywide permit for torch operations.
(3)On any rooftop, or in connection with any torch-applied roofing system operation.
For hot work operation with citywide permit, the owner of the premises of the hot work operation
areas must be notified in writing by the citywide permit holder ______ the hot work is to be
started. - ANSat least 48 hours before
The pre-hot work check must be conducted by the responsible person before hot work is
authorized and __________ - ANSleast once per day.
The check reports must be kept at the work site during the work, made available for inspection
by a representative of the FDNY, and maintained on the premises for a minimum of - ANS48
hours after work is complete.
A pre-hot work check must be conducted at least - ANSonce per day
Hot work operations involving cutting or welding shall be conducted at least - ANS35 feet from
combustible materials and combustible waste
All other hot work operations shall be conducted at least - ANS25 feet from combustible
materials and combustible waste
Sprinkler system protection ____________while hot work is performed. - ANSmust not be shut
off or impaired
When should a Fire watch be maintained - ANSA fire watch must be maintained during any hot
work operation.
What other duties should the Fire Watch have while on hot water operations. - ANSThe persons
conducting a fire watch shall not have other duties.
Where hose lines are required, they shall be connected, charged and ready for operation -
ANSAt least one portable fire extinguisher with a minimum 2-A:20-B:C
How far away should one fire extinguisher be from any operation - ANS30 feet
The fire watch for torch operations conducted at the following three locations shall be conducted
by at least one F-60 fire guard - ANS(1)Construction sites.
(2)In any building or structure, when the torch operation is conducted by a person holding a
citywide permit for torch operations.
(3)On any rooftop, or in connection with any torch-applied roofing system operation.
