ATSSA Traffic Control Supervisor Re-certification
questions with correct answers 100% Verified
L=(WS²)/60 for 40MPH or less,
L=WS for 45MPH or more - Correct Answer Formula for Min. taper length
The off peak 85th percentile. Which is the speed at or below which 85% of vehicles travel operating speed in free flow conditions - Correct Answer speed used in formulas should be
125' - Correct Answer Distance of L for 25 MPH with 12' Lane width
245' - Correct Answer Distance of L for 35 MPH with 12' Lane width
540' - Correct Answer Distance of L for 45 MPH with 12' Lane width
660' - Correct Answer Distance of L for 55 MPH with 12' Lane width
780' - Correct Answer Distance of L for 65 MPH 12' Lane width
L Minimum - Correct Answer Merging Taper Length
1/2 L Minimum - Correct Answer Shifting Taper Length
1/3 L Minimum - Correct Answer Shoulder Taper Length
50'-100' regardless of speed
6 devices 10'-20' apart - Correct Answer One-Lane, Two-Way Taper (Flagger taper) Length and number of devices
50'-100' per lane - Correct Answer Downstream taper Length
2L - Correct Answer Tangent distance (between tapers)
1/2L - Correct Answer Tangent distance before shifting taper
Buffer Space
Work Space
Traffic Space - Correct Answer Activity Area Sub-components (3)
Recovery Area for errant vehicles: Forgiving design
Protects workers and Motorists
Always completely empty or clear
No vehicles, truck-mounted attenuator, equipment, or materials
STRONGLY RECOMMENDED: unless there is a documented reason not to - Correct Answer Longitudinal Buffer Space Where road users are returned to their normal path
extends from the downstream end of the work area to the last device such as end work zone sign
May contain:
end work zone sign: usually 500' past last device
downstream taper = 50'-100' per lane - Correct Answer Termination Area is:
can contain: (2)
100' - Correct Answer Recommended Advanced Warning Sign Spaceing: Urban (low speed)
350' - Correct Answer Recommended Advanced Warning Sign Spaceing: urban (high speed)
500' - Correct Answer Recommended Advanced Warning Sign Spaceing: Rural
1000', 1500', and 2640' - Correct Answer Recommended Advanced Warning Sign Spaceing: freeways and expressways (3)
1 Mile
50%
shoulder at beginning of taper if possible, if not, as close to beginning as possible inside
taper. - Correct Answer Arrow board visibility distance by design:
night time dimming:
location:
taper: not to exceed distance in feet = to posted speed limit
tangent: distance = double posted speed limit - Correct Answer device spacing taper:
tangent:
A: Low intensity flashing
B: High-intensity flashing
C: Steady Burn
D: 360° steady burn - Correct Answer Warning lights types:
Type A:
Type B:
Type C:
Type D:
Uses for portable changeable message sign PCMS - Correct Answer speed drops
significant delays
adverse conditions
advance notice of closures
advance notice of road changes
questions with correct answers 100% Verified
L=(WS²)/60 for 40MPH or less,
L=WS for 45MPH or more - Correct Answer Formula for Min. taper length
The off peak 85th percentile. Which is the speed at or below which 85% of vehicles travel operating speed in free flow conditions - Correct Answer speed used in formulas should be
125' - Correct Answer Distance of L for 25 MPH with 12' Lane width
245' - Correct Answer Distance of L for 35 MPH with 12' Lane width
540' - Correct Answer Distance of L for 45 MPH with 12' Lane width
660' - Correct Answer Distance of L for 55 MPH with 12' Lane width
780' - Correct Answer Distance of L for 65 MPH 12' Lane width
L Minimum - Correct Answer Merging Taper Length
1/2 L Minimum - Correct Answer Shifting Taper Length
1/3 L Minimum - Correct Answer Shoulder Taper Length
50'-100' regardless of speed
6 devices 10'-20' apart - Correct Answer One-Lane, Two-Way Taper (Flagger taper) Length and number of devices
50'-100' per lane - Correct Answer Downstream taper Length
2L - Correct Answer Tangent distance (between tapers)
1/2L - Correct Answer Tangent distance before shifting taper
Buffer Space
Work Space
Traffic Space - Correct Answer Activity Area Sub-components (3)
Recovery Area for errant vehicles: Forgiving design
Protects workers and Motorists
Always completely empty or clear
No vehicles, truck-mounted attenuator, equipment, or materials
STRONGLY RECOMMENDED: unless there is a documented reason not to - Correct Answer Longitudinal Buffer Space Where road users are returned to their normal path
extends from the downstream end of the work area to the last device such as end work zone sign
May contain:
end work zone sign: usually 500' past last device
downstream taper = 50'-100' per lane - Correct Answer Termination Area is:
can contain: (2)
100' - Correct Answer Recommended Advanced Warning Sign Spaceing: Urban (low speed)
350' - Correct Answer Recommended Advanced Warning Sign Spaceing: urban (high speed)
500' - Correct Answer Recommended Advanced Warning Sign Spaceing: Rural
1000', 1500', and 2640' - Correct Answer Recommended Advanced Warning Sign Spaceing: freeways and expressways (3)
1 Mile
50%
shoulder at beginning of taper if possible, if not, as close to beginning as possible inside
taper. - Correct Answer Arrow board visibility distance by design:
night time dimming:
location:
taper: not to exceed distance in feet = to posted speed limit
tangent: distance = double posted speed limit - Correct Answer device spacing taper:
tangent:
A: Low intensity flashing
B: High-intensity flashing
C: Steady Burn
D: 360° steady burn - Correct Answer Warning lights types:
Type A:
Type B:
Type C:
Type D:
Uses for portable changeable message sign PCMS - Correct Answer speed drops
significant delays
adverse conditions
advance notice of closures
advance notice of road changes
