NACE CIP 1 CBT Exam Study Questions Rated 100% Correct!!

How is the process of steel corrosion ALWAYS described? - electrochemical Based on the galvanic series presented in the NACE CIP Level 1 Manual, which three can be used effectively as galvanic anodes for carbon steel? - zinc, aluminum, magnesium A decrease in temperature will generally cause the corrosion rate to _____ - decrease The electrolyte is a medium which carries the following type of current? - Ionic Corrosion occurring uniformly across a surface is called _____ - general corrosion When a conflict occurs on a coatings project, as the inspector, the preferred first course of action is to _____ - actively listen and endeavor to understand the positions of others A proper coating specification should contain information regarding ____, ____, and ____ - surface preparation standards, safety, and locations to be used Is it ever okay to accept a gift from a contractor? - NO What should you do if you find discrepancies between the specification and the coating manufacturer's technical data sheet? - seek written clarification from the owner's representative What are the general components of inspection reports? - - results of inspection tests - location(s) of work - details of preparation and application Inspection reports typically provide sufficient detail permitting the owner to evaluate ___ ___ ___ ___ - - contractor's performance- inspector's performance - job progress - work interruptions As an inspector headed to the job site for the first time, where would you always find instruction regarding appropriate types of PPE? - Safety Data Sheet (SDS), previously called MSDS