WELL AP Exam Features Air Solved 100% Correct!!

Feature 01: Air Quality Standards - Limits levels of indoor air pollutants Feature 01 Air Quality Standards : Part 1: Standards for Volatile Substances - Limits levels of formaldehyde to less than 27 ppb. Limit levels of VOCs to less than 500 micrograms per cubic meter Feature 01: Air Quality Standards: Part 2: Standards for Particulate Matter and Inorganic Gases - Limits CO levels to less than 9ppb. Limits PM2.5 levels to less than 15 ug/m3. Limits PM10 levels to less than 50 ug/m3. Limits ozone levels to less than 51ppb. Feature 01: Air Quality Standards: Part 3: Radon - Limits radon levels to less than 4 pCi/L Feature 02: Smoking Ban - To eliminate smoking inside and on site. And educate occupants on dangers Feature 02: Smoking Ban, Part 1: Indoor Smoking Ban - no smoking or e-cigarettes inside Feature 02: Smoking Ban, Part 2: Outdoor Smoking Ban - No smoking signs at entrances, 25' ban from all entries, windows, decks, patios. Signs educate occupants Feature 03: Ventilation Effectiveness - Address the design of ventilation system, testing & balancing, and max CO2 levels Feature 03: Ventilation Effectiveness, Part 1: Ventilation Design - must comply with ASHRAE 62.1- 2013. Air around 1 mile of building must comply with NAAQS Feature 03: Ventilation Effectiveness, Part 2: Demand Controlled Ventilation - Any spaces larger than 500sqft and more than 25 people per 1000sqft. Limits CO2 levels to below 800ppbFeature 03: Ventilation Effectiveness, Part 3: System Balancing - HVAC systems must be tested & balanced after substantial completion, but before occupancy Feature 04: VOC Reduction - Reduce amount of materials used that release VOCs Feature 04: VOC Reduction, Part 1: Interior Paints and Coatings - must meet applicable regulations, page 43 Feature 04: VOC Reduction, Part 2: Interior Adhesives and Sealants - Feature 04: VOC Reduction, Part 3: Flooring - Must limit products according to CDHP v1.1-2010 Feature 04: VOC Reduction, Part 4: Insulation - CDHP v1.1-2010