MSSC Quality post test answers 2023/2024 with correct answers

MSSC Quality post test answers 2023/2024 with correct answers 1. Inspection data requires for making effective manufacturing decisions: - CORRECT ANSWER Accurate data. 2. A feature of all mistake-proofing systems is: - CORRECT ANSWER Automated inspection. 3. A manufacturer has several options to handle nonconforming materials. The option to use a nonconforming material is acceptable: - CORRECT ANSWER Only if it does not affect performance or cause a safety hazard. 4. A process SOP should include clearly stated procedures for dealing with nonconforming materials. If nonconformity is detected and there are no written procedures, it is the responsibility of the frontline worker to: - CORRECT ANSWER C. Refer the problem to a supervisor or responsible department. 5. Third-party audits provide evidence that a quality program meets standards. A - CORRECT ANSWER ...C. Acquire or maintain certification. 6. An auditor bases his/her audit report on data collected by: - CORRECT ANSWER Directly observing the process. Interviewing workers and supervisors. Examining production records. 7. Inspections can be carried out for several purposes, including as a part of continuous improvement. To perform inspections, workers should know how to: - CORRECT ANSWER Read production documents. Use inspection and analysis tools Read safety and environmental standards. 8. A possible source of inaccuracy in inspection data is: - CORRECT ANSWER Human error. 9. Communication breakdowns can lead to inaccuracies and poor decisions. Detailed instructions for communicating results must be included in every: - CORRECT ANSWER Inspection plan. 10. The inspection frequency for any given process depends on a number of factors. This frequency is specified in a (n): - CORRECT ANSWER Sampling plan. 11. The main purpose of inspecting the final product is: - CORRECT ANSWER Product acceptance. 12. Many products require, a record of a material's history. This record is known as the product's: - CORRECT ANSWER Traceability. 13. In some cases, nonconforming goods are shipped to a customer if the customer waives the specification. When this happens, workers should: - CORRECT ANSWER Be aware that the shipment is an exception. 14. Many inspections are performed by frontline workers. Quality management systems require that the company: - CORRECT ANSWER Provide training of proper procedures for testing. Include training in health, safety, and environmental procedures. Keep complete documentation of all training. 15. The purpose of a quality audit is to: - CORRECT ANSWER Provide assurance that the process follows the guidelines of the quality plan. 16. The three types of quality audits are: - CORRECT ANSWER Internal, external, and third-party. 17. An audit report is always presented to the person or organization requesting the audit. A summary of each discrepancy from standards should also be available to: - CORRECT ANSWER Production workers involved in the process. 18. What documentation is required for "first piece" inspections? - CORRECT ANSWER D. In-process form 19. Product testing must include shipping tests to: - CORRECT ANSWER B. Identify problem areas in product design or assembly 20. If two angles are complementary, then both are angles. - CORRECT ANSWER Acute 21. Which of the following is involved with reducing setup? - CORRECT ANSWER First good piece every time 22. When using a nut, bolt, flat washer, and lock washer, the lock washer should be positioned: - CORRECT ANSWER Between the nut and flat washe