Test Bank For Introduction to Managerial Accounting 6th Edition By Brewer, Garrison, Noreen Complete All Chapters Latest Updated

Test Bank For Introduction to Managerial Accounting 6th Edition By Brewer, Garrison, Noreen Complete All Chapters Latest Updated . The following journal entry would be made to apply overhead cost to jobs in a job-order costing system: True False 4. Under a job-order cost system the Work in Process account is debited with the cost of materials purchased. True False 5. The process of assigning overhead cost to jobs is known as overhead application. True False 6. The cost of a completed job in a job-order costing system typically consists of the actual direct materials cost of the job, the actual direct labor cost of the job, and the actual manufacturing overhead cost of the job. True False 7. A debit balance in the Manufacturing Overhead account at the end of the year means that manufacturing overhead is overapplied. True False 8. Period costs are expensed as incurred, rather than going into the Work in Process account. True False 9. Advertising costs should be charged to the Manufacturing Overhead account. True False 10 . When a job has been completed, the goods are transferred from the production department to the finished goods warehouse and the journal entry would include a credit to Work in Process. True False 11 . Underapplied or overapplied manufacturing overhead represents the difference between actual overhead costs and applied overhead costs. True False 12 . Top management salaries should not go into the Manufacturing Overhead account. True False 13 . If manufacturing overhead applied exceeds the actual manufacturing overhead costs of the period, then manufacturing overhead is overapplied. True False Multiple Choice Questions 14 . In computing its predetermined overhead rate, Marple Company inadvertently left its indirect labor costs out of the computation. This oversight will cause: A. Manufacturing Overhead to be overapplied. B. the Cost of Goods Manufactured to be understated. C. the debits to the Manufacturing Overhead account to be understated. D. the ending balance in Work in Process to be overstated. 15 . Which of the following is the correct formula to compute the predetermined overhead rate? A. Estimated total units in the allocation base divided by estimated total manufacturing overhead costs. B. Estimated total manufacturing overhead costs divided by estimated total units in the allocation base. C. Actual total manufacturing overhead costs divided by estimated total units in the allocation base. D. Estimated total manufacturing overhead costs divided by actual total units in the allocation base. Full file at 16 . Which of the following would probably be the least appropriate allocation base for allocating overhead in a highly automated manufacturer of specialty valves? A. machinehours B. power consumption C. direct laborhours D. machine setups 17 . What document is used to determine the actual amount of direct labor to record on a job cost sheet? A. time ticket B. payroll register C. production order D. wages payable account Full file at 18 . A proper journal entry to close overapplied manufacturing overhead to Cost of Goods Sold would be: A. Option A B. Option B C. Option C D. Option D 19 . In a job-order costing system, direct labor cost is ordinarily debited to: A. Manufacturing Overhead. B. Cost of Goods Sold. C. Finished Goods. D. Work in Process. Full file at 20 . In a job-order costing system, the use of direct materials that have been previously purchased is recorded as a debit to: A. Raw Materials inventory. B. Work in Process inventory. C. Finished Goods inventory. D. Manufacturing Overhead. 21 . The journal entry to record the incurrence of indirect labor costs is: A. Option A B. Option B C. Option C D. Option D Full file at 22 . Which of the following accounts is debited when direct labor is recorded? A. Work in process B. Salaries and wages expense C. Salaries and wages payable D. Manufacturing overhead 23 . The balance in the Work in Process account equals: A. the balance in the Finished Goods inventory account. B. the balance in the Cost of Goods Sold account. C. the balances on the job cost sheets of uncompleted jobs. D. the balance in the Manufacturing Overhead account. 24 . In a job-order costing system, indirect materials that have been previously purchased and that are used in production are recorded as a debit to: A. Work in Process inventory. B. Manufacturing Overhead. C. Finished Goods inventory. D. Raw Materials inventory. Full file at 25 . Martinez Aerospace Company uses a job-order costing system. The direct materials for Job # were purchased in July and put into production in August. The job was not completed by the end of August. At the end of August, in what account would the direct material cost assigned to Job # be located? A. raw materials inventory B. work in process inventory C. finished goods inventory D. cost of goods manufactured 26 . Which terms will make the following statement true? When manufacturing overhead is overapplied, the Manufacturing Overhead account has a __________ balance and applied manufacturing overhead is greater than __________ manufacturing overhead. A. debit, actual B. credit, actual C. debit, estimated D. credit, estimated Full file at 27 . Overapplied manufacturing overhead occurs when: A. applied overhead exceeds actual overhead. B. applied overhead exceeds estimated overhead. C. actual overhead exceeds estimated overhead. D. budgeted overhead exceeds actual overhead. 28 . Daguio Corporation uses direct labor-hours in its predetermined overhead rate. At the beginning of the year, the total estimated manufacturing overhead was $224,580. At the end of the year, actual direct labor-hours for the year were 18,200 hours, manufacturing overhead for the year was underapplied by $12,100, and the actual manufacturing overhead was $219,580. The predetermined overhead rate for the year must have been closest to: A. $11.40 per machinehour B. $12.34 per machinehour C. $12.06 per machinehour D. $10.53 per machinehour Full file at 29 . Wert Corporation uses a predetermined overhead rate based on direct labor cost to apply manufacturing overhead to jobs. Last year, the company's estimated manufacturing overhead was $1,200,000 and its estimated level of activity was 50,000 direct labor-hours. The company's direct labor wage rate is $12 per hour. Actual manufacturing overhead amounted to $1,240,000, with actual direct labor cost of $650,000. For the year, manufacturing overhead was: A. overapplied by $60,000 B. underapplied by $60,000 C. overapplied by $40,000 D. underapplied by $44,000 30 . Crinks Corporation uses direct labor-hours in its predetermined overhead rate. At the beginning of the year, the estimated direct labor-hours were 11,200 hours and the total estimated manufacturing overhead was $259,840. At the end of the year, actual direct labor-hours for the year were 10,800 hours and the actual manufacturing overhead for the year was $254,840. Overhead at the end of the year was: A. $4,280 overapplied B. $9,280 overapplied C. $9,280 underapplied D. $4,280 underapplied Full file at 31 . At the beginning of the year, manufacturing overhead for the year was estimated to be $267,500. At the end of the year, actual direct laborhours for the year were 22,100 hours, the actual manufacturing overhead for the year was $262,500, and manufacturing overhead for the year was overapplied by $13,750. If the predetermined overhead rate is based on direct labor-hours, then the estimated direct labor-hours at the beginning of the year used in the predetermined overhead rate must have been: A. 22,100 direct laborhours B. 19,900 direct laborhours C. 21,000 direct laborhours D. 21,400 direct laborhours 32 . Brace Corporation uses direct labor-hours in its predetermined overhead rate. At the beginning of the year, the estimated direct labor-hours were 21,600 hours. At the end of the year, actual direct labor-hours for the year were 20,400 hours, the actual manufacturing overhead for the year was $506,920, and manufacturing overhead for the year was underapplied by $23,440. The estimated manufacturing overhead at the beginning of the year used in the predetermined overhead rate must have been: A. $501,92 0 B. $531,44 5 C. $483,48 0 D. $511,92 0 Full file at 33 . Yista Corporation uses a predetermined overhead rate based on direct labor-hours to apply manufacturing overhead to jobs. The company estimated manufacturing overhead at $510,000 for the year and direct labor-hours at 100,000 hours. Actual manufacturing overhead costs incurred during the year totaled $540,000. Actual direct labor-hours were 105,000. What was the overapplied or underapplied overhead for the year? A. $30,000 overapplied B. $30,000 underapplied C. $4,500 overapplied D. $4,500 underapplied 34 . Malcolm Company uses a predetermined overhead rate based on direct labor-hours to apply manufacturing overhead to jobs. The cost records for September will show: A. Overapplied manufacturing overhead of $1,500 B. Underapplied overhead of $1,500 C. Overapplied manufacturing overhead of $3,500 D. Underapplied overhead of $3,500 Full file at 35 . The Work in Process inventory account of a manufacturing firm shows a balance of $3,000 at the end of an accounting period. The job cost sheets of two uncompleted jobs show charges of $500 and $300 for direct materials, and charges of $400 and $600 for direct labor. From this information, it appears that the company is using a predetermined overhead rate, as a percentage of direct labor costs, of: A. 83 % B. 120 % C. 40 % D. 300 % 36 . Washtenaw Corporation uses a job-order costing system. The following data are for last year: Washtenaw applies overhead using a predetermined rate based on direct labor-hours. What predetermined overhead rate was used last year? A. $3.55 per direct laborhour B. $3.25 per direct laborhour C. $3.08 per direct laborhour D. $3.36 per direct laborhour Full file at 37 . Capalbo Corporation bases its predetermined overhead rate on the estimated labor-hours for the upcoming year. At the beginning of the most recently completed year, the company estimated the labor-hours for the upcoming year at 52,000 labor-hours. The estimated variable manufacturing overhead was $2.78 per labor-hour and the estimated total fixed manufacturing overhead was $1,192,360. The actual labor-hours for the year turned out to be 52,600 labor-hours. The predetermined overhead rate for the recently completed year was closest to: A. $2.7 8 B. $25.4 5 C. $25.7 1 D. $22.9 3 Full file at 38 . Compton Company uses a predetermined overhead rate in applying overhead to production orders on a labor cost basis in Department A and on a machine-hours basis in Department B. At the beginning of the most recently completed year, the company made the following estimates: What predetermined overhead rate would be used in Department A and Department B, respectively? A. 83% and $5 B. 83% and $3 C. 120% and $3 D. 83% and $4 Full file at 39 . Hayne Corporation bases its predetermined overhead rate on the estimated machine-hours for the upcoming year. Data for the most recently completed year appear below: The predetermined overhead rate for the recently completed year was closest to: A. $7.8 9 B. $30.9 5 C. $24.5 2 D. $32.4 1 Full file at 40 . The Collins Company uses predetermined overhead rates to apply manufacturing overhead to jobs. The predetermined overhead rate is based on labor cost in Dept. A and machine-hours in Dept. B. At the beginning of the year, the company made the following estimates: What predetermined overhead rates would be used in Dept A and Dept B, respectively? A. 71% and $4.00 B. 140% and $4.00 C. 140% and $4.80 D. 71% and $4.80 Full file at 41 . Simoneaux Corporation bases its predetermined overhead rate on the estimated machine-hours for the upcoming year. At the beginning of the most recently completed year, the company estimated the machine-hours for the upcoming year at 22,000 machine-hours. The estimated variable manufacturing overhead was $8.65 per machine-hour and the estimated total fixed manufacturing overhead was $609,400. The predetermined overhead rate for the recently completed year was closest to: A. $36.35 per machinehour B. $27.70 per machinehour C. $33.32 per machinehour D. $8.65 per machinehour Full file at 42 . Kelsh Company uses a predetermined overhead rate based on machinehours to apply manufacturing overhead to jobs. The company has provided the following estimated costs for next year: Kelsh estimates that 5,000 direct labor-hours and 10,000 machine-hours will be worked during the year. The predetermined overhead rate per hour will be: A. $6.8 0 B. $6.4 0 C. $3.4 0 D. $8.2 0 Full file at 43 . Kaiser Corporation bases its predetermined overhead rate on the estimated machine-hours for the upcoming year. Data for the upcoming year appear below: The predetermined overhead rate for the recently completed year was closest to: A. $6.6 8 B. $25.0 2 C. $25.5 9 D. $18.3 4 44 . The following data have been recorded for recently completed Job 674 on its job cost sheet. Direct materials cost was $2,039. A total of 32 direct labor-hours and 175 machine-hours were worked on the job. The direct labor wage rate is $14 per labor-hour. The company applies manufacturing overhead on the basis of machine-hours. The predetermined overhead rate is $15 per machine-hour. The total cost for the job on its job cost sheet would be: A. $2,96 7 B. $2,48 7 C. $2,06 8 D. $5,11 2 Full file at 45 . Job 731 was recently completed. The following data have been recorded on its job cost sheet: The company applies manufacturing overhead on the basis of machinehours. The predetermined overhead rate is $14 per machine-hour. The total cost that would be recorded on the job cost sheet for Job 731 would be: A. $3,28 8 B. $5,09 4 C. $4,25 4 D. $2,41 8 Full file at 46 . The operations of the Kerry Company resulted in underapplied overhead of $5,000. The entry to close out this balance to Cost of Goods Sold and the effect of the underapplied overhead on Cost of Goods Sold would be: A. Option A B. Option B C. Option C D. Option D 47 . Reichelderfer Corporation has provided data concerning the company's Manufacturing Overhead account for the month of August. Prior to the closing of the overapplied or underapplied balance to Cost of Goods Sold, the total of the debits to the Manufacturing Overhead account was $50,000 and the total of the credits to the account was $72,000. Which of the following statements is true? A. Manufacturing overhead transferred from Finished Goods to Cost of Goods Sold during the month was $72,000. B. Manufacturing overhead applied to Work in Process for the month was $50,000. C. Actual manufacturing overhead for the month was $50,000. D. Manufacturing overhead for the month was underapplied by $22,000. Full file at 48 . Hults Corporation has provided data concerning the company's Manufacturing Overhead account for the month of November. Prior to the closing of the overapplied or underapplied balance to Cost of Goods Sold, the total of the debits to the Manufacturing Overhead account was $75,000 and the total of the credits to the account was $57,000. Which of the following statements is true? A. Manufacturing overhead transferred from Finished Goods to Cost of Goods Sold during the month was $75,000. B. Actual manufacturing overhead incurred during the month was $57,000. C. Manufacturing overhead applied to Work in Process for the month was $75,000. D. Manufacturing overhead for the month was underapplied by $18,000. 49 . Vandagriff Corporation has provided data concerning the company's Manufacturing Overhead account for the month of June. Prior to the closing of the overapplied or underapplied balance to Cost of Goods Sold, the total of the debits to the Manufacturing Overhead account was $77,000 and the total of the credits to the account was $64,000. Which of the following statements is true? A. Manufacturing overhead transferred from Finished Goods to Cost of Goods Sold during the month was $77,000. B. Manufacturing overhead applied to Work in Process for the month was $64,000. C. Manufacturing overhead for the month was overapplied by $13,000. D. Actual manufacturing overhead incurred during the month was $64,000. Full file at 50 . During October, Crusan Corporation incurred $62,000 of direct labor costs and $4,000 of indirect labor costs. The journal entry to record the accrual of these wages would include a: A. debit to Work in Process of $66,000 B. credit to Work in Process of $66,000 C. debit to Work in Process of $62,000 D. credit to Work in Process of $62,000 51 . During December at Ingrim Corporation, $74,000 of raw materials were requisitioned from the storeroom for use in production. These raw materials included both direct and indirect materials. The indirect materials totaled $6,000. The journal entry to record the requisition from the storeroom would include a: A. debit to Raw Materials of $74,000 B. debit to Work in Process of $68,000 C. credit to Manufacturing Overhead of $6,000 D. debit to Work in Process of $74,000 Full file at 52 . Stickles Corporation incurred $79,000 of actual Manufacturing Overhead costs during August. During the same period, the Manufacturing Overhead applied to Work in Process was $75,000. The journal entry to record the incurrence of the actual Manufacturing Overhead costs would include a: A. debit to Manufacturing Overhead of $79,000 B. credit to Manufacturing Overhead of $79,000 C. credit to Work in Process of $75,000 D. debit to Work in Process of $75,000 53 . Valles Corporation had $22,000 of raw materials on hand on February 1. During the month, the company purchased an additional $75,000 of raw materials. The journal entry to record the purchase of raw materials would include a: A. credit to Raw Materials of $97,000 B. debit to Raw Materials of $97,000 C. credit to Raw Materials of $75,000 D. debit to Raw Materials of $75,000 Full file at 54 . Wedd Corporation had $35,000 of raw materials on hand on May 1. During the month, the company purchased an additional $68,000 of raw materials. During May, $92,000 of raw materials were requisitioned from the storeroom for use in production. These raw materials included both direct and indirect materials. The indirect materials totaled $5,000. The debits to the Work in Process account as a consequence of the raw materials transactions in May total: A. $92,00 0 B. $ 0 C. $68,00 0 D. $87,00 0 55 . During February, Degan Inc. transferred $60,000 from Work in Process to Finished Goods and recorded a Cost of Goods Sold of $65,000. The journal entries to record these transactions would include a: A. debit to Finished Goods of $65,000 B. credit to Cost of Goods Sold of $65,000 C. credit to Work in Process of $60,000 D. credit to Finished Goods of $60,000 Full file at 56 . Kirson Corporation incurred $89,000 of actual Manufacturing Overhead costs during December. During the same period, the Manufacturing Overhead applied to Work in Process was $92,000. The journal entry to record the application of Manufacturing Overhead to Work in Process would include a: A. debit to Manufacturing Overhead of $92,000 B. debit to Work in Process of $89,000 C. credit to Manufacturing Overhead of $92,000 D. credit to Work in Process of $89,000 57 . At the beginning of August, Hogancamp Corporation had $26,000 of raw materials on hand. During the month, the company purchased an additional $73,000 of raw materials. During August, $77,000 of raw materials were requisitioned from the storeroom for use in production. The credits to the Raw Materials account for the month of August total: A. $73,00 0 B. $77,00 0 C. $99,00 0 D. $26,00 0 Full file at 58 . During July at Tiner Corporation, $74,000 of raw materials were requisitioned from the storeroom for use in production. These raw materials included both direct and indirect materials. The indirect materials totaled $7,000. The journal entry to record this requisition would include a debit to Manufacturing Overhead of: A. $ 0 B. $74,00 0 C. $7,00 0 D. $67,00 0 59 . On February 1, Caddell Corporation had $28,000 of raw materials on hand. During the month, the company purchased an additional $70,000 of raw materials. During February, $81,000 of raw materials were requisitioned from the storeroom for use in production. The debits to the Raw Materials account for the month of February total: A. $98,00 0 B. $70,00 0 C. $28,00 0 D. $81,00 0 Full file at 60 . In May, Hervey Inc. incurred $60,000 of direct labor costs and $3,000 of indirect labor costs. The journal entry to record the accrual of these wages would include a: A. credit to Manufacturing Overhead of $3,000 B. debit to Work in Process of $63,000 C. credit to Work in Process of $63,000 D. debit to Manufacturing Overhead of $3,000 61 . The Donaldson Company uses a job-order costing system. The following data were recorded for July: Overhead is applied to jobs at the rate of 80% of direct materials cost. Jobs 475, 477, and 478 were completed during July and transferred to finished goods. Jobs 475 and 478 have been delivered to the customer. Donaldson's Work in Process inventory balance on July 31 was: A. $7,28 0 B. $2,60 0 C. $3,16 0 D. $3,32 0 Full file at 62 . Pinnini Co. uses a predetermined overhead rate based on direct laborhours to apply manufacturing overhead to jobs. Last year, Pinnini Company incurred $225,000 in actual manufacturing overhead cost. The Manufacturing Overhead account showed that overhead was overapplied $14,500 for the year. If the predetermined overhead rate was $5.00 per direct labor-hour, how many hours did the company work during the year? A. 45,000 hours B. 47,900 hours C. 42,100 hours D. 44,000 hours 63 . Dowan Company uses a predetermined overhead rate based on direct labor-hours to apply manufacturing overhead to jobs. Last year Dowan Company incurred $156,600 in actual manufacturing overhead cost. The Manufacturing Overhead account showed that manufacturing overhead was underapplied by $12,600 for the year. If the predetermined overhead rate is $6.00 per direct labor-hour, how many hours did the company work during the year? A. 26,000 hours B. 24,000 hours C. 28,200 hours D. 25,000 hours Full file at 64 . Kelson Company applies overhead to jobs on the basis of 60% of direct labor cost. If Job 201 shows $27,000 of manufacturing overhead applied, the direct labor cost on the job was: