Millwright-Installation & Levelling Exam Questions and Answers 2023 with complete solution

Millwright-Installation & Levelling Exam Questions and Answers 2023 with complete solution Most installation procedures start at the machine foundation substructure because? a. the manual says so b. the foundation introduces misalignments in the equipment c. the foundation moves d. the foundation is inconsistant b. the foundation introduces misalignments in the equipment When installing on concrete, millwrights usally start their installation on? a. level ground b. tempered ground c. the assumption that they will have to install anchor bolts d. exsiting anchor bolts d. exsiting anchor bolts Foundations are usually constructed with a. minus elevation b. positive elevation c. plane elevation d. on set elevation a. minus elevation This eliminates foundation shrinkage, 38mm is left for shims and grouting What is used to firmly secure the machine baseplate or soleplates to a concrete foundation? Anchor Bolts How far should straight anchor bolts without deformed ends be set into the foundation? a. 45mm b. 2 xs diameter c. 45 xs diameter d. 25 xs diameter d. 25 xs diameter Where are boxed anchor bolts usually used? a. small mill machinery b. medium machines c. high speed machines with high vibration d. large mill machines with high vibration d. large mill machines with high vibration Mechanical expansion anchors are used when? Installation to existing concrete is necessary What is an as built installation? When their are no drawings and their locations are determined by exsisting baseplate, soleplate or base of machine