Band saw safety exam correctly answered to pass 2023

Band saw safety exam correctly answered to pass 2023The band saw blade is continuous and rides on two wheels that must be - correct answer Guarded The band saw blade will stretch, making it necessary to make frequent - correct answer adjustments The blade guard must clear the material being cut by no more than - correct answer 1/4 When changing a band saw blade, make sure the teeth are pointing - correct answer Downward The recommended safe distance between your hand and the band saw blade is - correct answer 4 inches If the saw is running, it is never safe to remove scrap by using your - correct answer Hands Lack of control and unsafe situation is created if the band saw blade becomes - correct answer Dull The only safe way to stop a band saw blade is by using the factory- installed - correct answer Brake The minimum radius to be cut, using the band saw is determined by the blade - correct answer Width When making adjustments to the band saw, make sure the blade is centered on the - correct answer Wheels You must wait until the saw has come to a complete stop before leaving the - correct answer Safety zone Cutting small pieces of material is safely accomplished with a - correct answer Push- stick In order to be safe when cutting larger material you will need assistance or a - correct answer Extension table In order to do a quality job safely, the operator must have total - correct answer Concentration Be aware that at the completion of the cut your hand can unexpectedly move towards the - correct answer Blade Make adjustments to the blade guides and support wheels when the saw is stopped and - correct answer Disconnected