MAE 1351 Exam 1 (Questions with 100% correct answers)

sawing correct answers a multitoothed cutting blade is pulled through the material Qualities of sawing correct answers Pros: -Quick Cons: -precision -quality lathe correct answers the workpiece is rapidly rotated about a single axis turning correct answers Circumferential grooves and screw threads are made using this process, as are stepped, tapered, and rounded shaft boring correct answers Removal of material on the inside of the workpiece drilling correct answers a rapidly spinning cutting tool called a drill bit is slowly pushed into a stationary workpiece drill bit correct answers long, with a sharpened tip and spiral grooves along their length to help remove the material that is cut away drill press correct answers can be used to spin a drill bit and plunge it into the workpiece through holes correct answers Holes that go completely through the workpiece blind holes correct answers holes that go part of the way through the workpiece tap correct answers To cut internal threads. tapped hole correct answers A hole with screw threads inside reaming correct answers the process of removing the bur from the inside end of steel pipe after it has been cut Milling machines (mills) correct answers machine tools that perform milling; they are often classed in two basic forms, horizontal and vertical, which refers to the orientation of the main spindle spindle correct answers holds and rapidly spins a variety of different cutting tools from a mill end mill correct answers the cutter in an end milling operation; it has a cutting portion and a shank; it's shank is gripped by the spindle of the machine, and the cutter usually rotates on an axis that is perpendicular to the workpiece surface